Instructions / Assembly

Assembly - Spiker Aerator - 27

ASSEMBLY - SPIKER AERATOR

Assembly - Spiker Aerator

Identify Parts

Box of Parts

Bag of Parts

Assemble Tow Bars

1. Align tow bars (A) as shown.

2. Assemble two clevis straps (B) to front of tow bars using

two 5/16 x 2-1/4 in. carriage bolts (C) and two locknuts (D).

Hand tighten only.

3. Slide clevis assembly forward until front carriage bolt is

within 6 mm (1/4 in.) from the end of tow bars.

4. Install hitch pin (E) in clevis and fasten with spring

locking pin (F) through chain loop.

Qty. Part Description

1 Tine Tray Assembly (A)

1 Lift Handle (B)

2 Wheel Assembly (C)

1 Hitch Pin Assembly (D)

1 Bag of Parts (E)

2 Tow Bar (F)

Qty. Part Description

1 Vinyl Handle Grip

2 Painted Clevis

2 Transport Lock Pin

2 Hex Nut, 5/16 in.

2 Lockwasher, 5/16 in.

1Spring

4 Hex Bolt, 5/16 x 1 in.

2 Carriage Bolt, 5/16 x 2-1/4 in.

2 Hex Bolt, 1/2 x 3-3/4 in.

4 Hex Nut, 1/2 in.

2 Lockwasher, 1/2 in.

M79125

4 Flat Washer, 1/2 in.

1 Hex Bolt, 5/16 x 1-1/2 in.

7 Nylock Nut, 5/16 in.

5 Flat Washer, 5/16 in.

1 Special Plow Bolt, 3/8 x 2 in.

1 Flat Washer, 3/8 in.

1 Oblong Locknut, 3/8 in.

Qty. Part Description

M79138

M56882