Instructions / Assembly

Assembly - Spiker Aerator - 28

ASSEMBLY - SPIKER AERATOR

5. Install 5/16 x 1-1/2 in. cross hex bolt (I). Place chain

hook (H) around bolt and secure with 5/16 in. flat washer

and locknut (I).

6. Align tow bars and clevis. Tighten nuts (D) completely.

7. Tighten nylock nut (G) while holding chain hook forward

and centered between clevis halves.

Install Tow Bars to Tray Assembly

1. Stand tray assembly on its back. Loosen nylock nuts (A)

on mounting brackets (B) to ensure proper bracket

alignment while installing tow bars.

NOTE: You may want to have a helper or use a hoist to

steady tow bars during alignment.

2. Align tow bars (C) to insides of brackets (B) and fasten

with two 5/16 x 1 in. hex bolts (D), flat washer (E), and

nylock nuts (F). Hand tighten only. Repeat for other side.

3. Hold tow bars all the way to top of slots and tighten

nylock nuts (F).

4. Tighten nylock nuts (A) on mounting brackets.

Assemble Transport Wheels

1. Install 1/2 x 3-3/4 in. hex bolt (A) and 1/2 in. flat washer

(B) on valve stem side of wheel hub.

2. Turn wheel over to install second 1/2 in. flat washer (C)

CAUTION: Avoid injury! Tines have extremely

sharp points. Wear gloves and handle with

care.

M56882

M79127

M78713

M78714