Instructions / Assembly

Assembly - Lawn Roller - 35
ASSEMBLY - LAWN ROLLER
Assembly - Lawn Roller
Identify Box of Parts
Box of Parts
Bag of Parts
Install Scraper Frame Bar
1. Insert a 5/8 in. nylon bearing (A), from inside out, into
round hole at each end of scraper frame bar (B).
2. Remove the vinyl caps that are over ends of roller
assembly axle and slide a 5/8 in. flat washer (C) onto each
end.
Qty. Part Description
1 Roller Drum (A)
1 Scraper Bar Frame (B)
2 Bar Frame (C)
1 Tethered Pin Assembly (D)
1 Bag of Parts (E)
Qty. Part Description
2 Painted Clevis
1 Plastic Plug
4 Hex Bolt, 5/16 x 1 in.
2 Hex Bolt, 5/16 x 1-1/2 in.
2 Carriage Bolt, 5/16 x 2-1/4 in.
2 Flat Washer, 5/16 in.
4 Flat Washer, 5/8 in.
8 Nylock Nut, 5/16 in.
2 Nylon Bearing, 5/8 in.
2 Snap Ring, 5/8 in.
1 Frame Spacer
C
D
A
B
E
M56870
M92910
B
C
D
E
A
M56872
A
B
C
M56873