Replacement Part List

Assembly - Plug Aerator - 24
ASSEMBLY - PLUG AERATOR
Assembl y - Plug Aerator
Identify Parts
Picture Note: 40-Inch model shown.
NOTE: The following assembly instructions apply to
both the 40-Inch and 48-Inch models.
Box of Parts
Bag of Parts
Assemble Tow Bars
1. Align tow bars (A) as shown.
2. Assemble two clevis straps (B) to front of tow bars using
two 5/16 x 2-1/4 in. carriage bolts (C) and two locknuts (D).
Hand tighten only.
3. Slide clevis assembly forward until front carriage bolt is
within 6 mm (1/4 in.) from the end of tow bars.
4. Install hitch pin (E) in clevis and fasten with spring
locking pin (F) through chain loop.
Qty. Part Description
1 Plug Tray Assembly (A)
2 Tow Bar (B)
2 Wheel Assembly (C)
1 Hitch Pin Assembly (D)
1 Bag of Parts (E)
1 Lift Handle (F)
Qty. Part Description
3 Transport Pin, 5/16 in.
2 Carriage Bolt, 5/16 x 2 1/4 in.
1 Flat-Top Carriage Bolt, 3/8 x 2 in.
4 Hex Bolt, 5/16 x 1 in.
1 Hex Bolt, 5/16 x 1-1/2 in.
2 Hex Bolt, 1/2 x 3-3/4 in.
3 Hex Nut, 5/16 in.
4 Hex Nut, 1/2 in.
1 Oblong Locknut, 3/8 in.
D
E
F
A
B
C
M78705
7 Nylock Nut, 5/16 in.
3 Medium Lockwasher, 5/16 in.
2 Medium Lockwasher, 1/2 in.
5 Flat Washer, 11/32 x 11/16 x 1/16 in.
1 Flat Washer, 13/32 x 13/16 x 1/16 in.
4 Flat Washer, 17/32 x 1/16 x 3/32 in.
1 Vinyl Handle Grip
2 Clevis
1Spring
Qty. Part Description
A
M79138
M56882
B
C
D
F
E

Summary of content (1 pages)