Replacement Part List

Assembly - 2

ASSEMBLY

Assembly

Parts in Kit

MX34943

Bag of Parts - Hardware (marked A)

Qty. Description

2 Rear Tube (A)

2 Upper Tube (B)

2 Spreader Bar Assembly (C)

2 Vinyl Cap (D) (reference, included in Bag of parts B)

2 Hamper Mount Tube (E)

2 Lower Tube (F)

1 Hamper Stop Rod (G)

1 Hamper, w/ Windscreen (H)

1 Hamper Pull Rope (I)

1 Flat Grip (J) (reference, included in Bag of Parts A)

1 Lift Handle (K)

1 Upper Frame Assembly (L)

1 Hitch Clevis Assembly (M)

2 Tow Tube (N)

1 Lift Link (O) (reference, included in Bag of Parts A)

1 Brush Housing Assembly / Drive Unit (P)

Qty. Description

2 Hex Bolt, 5/16 x 2-1/4 in.

2 Hex Bolt, 5/16 x 1-1/2 in.

1 Hex Bolt, 5/16 x 1-3/4 in.

4 Carriage Bolt, 5/16 x 1-1/2 in.

4 Screw, 1/4 x 1-1/4 in.

Qty. Description

PAGE 1
ASSEMBLY Parts in Kit Assembly H A I B C B D D E A E F C J G F K L O P N M MX34943 Qty. Description 2 Rear Tube (A) 2 Upper Tube (B) 2 Spreader Bar Assembly (C) 2 Vinyl Cap (D) (reference, included in Bag of parts B) 2 Hamper Mount Tube (E) 2 Lower Tube (F) 1 Hamper Stop Rod (G) 1 Hamper, w/ Windscreen (H) 1 Hamper Pull Rope (I) 1 Flat Grip (J) (reference, included in Bag of Parts A) 1 Lift Handle (K) Qty.
PAGE 2
ASSEMBLY Qty. Description 1 Lock Pin 2. Insert lift link (E) into hole in cross tube (F), oriented as shown L G 1 Hitch Pin, 1/2 in. diameter. 1 Large Hairpin Cotter 1 Lock Washer, 5/16 in. 2 Flat Washer, 5/16 in. 1 Standard Nut, 5/16 in. 9 Nylock Nut, 5/16 in. 4 Lock Nut, 1/4 in. 4 Push Connector, 5/16 x 5/8 in. I J H K M N E O D P O Q MX33923 3. Insert the threaded end of lock pin (G) into upper hole (H) in lift handle (I) and secure using a 5/16 in.