Replacement Part List

ManualsBrandsJohn Deere ManualsKitchen42 in. 24 cu. ft. Tow-Behind Lawn Sweeper

Assembly - 3

ASSEMBLY

Bag of Parts - Hardware (marked B)

Assemble Front Frame and Lift Assembly

NOTE: Use Hardware Bag A components for this sequence.

MX33922

1. Align the upper frame assembly (A) with the brush housing assembly

(B) and secure on each side with two 5/16 x 1-1/2 in. carriage bolts (C)

(installed from the inside, as shown) and 5/16 in. nylock nuts (D). Tighten

hardware.

2. Insert lift link (E) into hole in cross tube (F), oriented as shown

MX33923

3. Insert the threaded end of lock pin (G) into upper hole (H) in lift handle

(I) and secure using a 5/16 in. lock washer (J) and 5/16 in. standard nut

(K).

4. Install the flat grip (L) on the end of the lift handle.

5. Rotate the lift handle and assemble it to the lift link (E) through the lower

hole (M).

6. Install a 5/16 x 1-3/4 in. hex bolt (N) through the middle hole in the lift

handle (I), then install a 5/16 in. flat washer (O) onto the hex bolt on the

other side of the lift handle, as shown.

7. Align the lift handle against the lock plate (P), with the lock pin in one of

the seven index holes at the top of the lock plate and the hex bolt through

the lower hole. Secure with spring (Q), 5/16 in. flat washer (O) and 5/16 in.

nylock nut (D). Tighten lock nut, then back off as necessary for proper

operation.

MX33924

8. Install the two tow tubes (R) into the upper frame assembly (A), and

secure with two 5/16 x 1-1/2 in. hex bolts (S) inserted from the outside,

and 5/16 in. nylock nuts (D) at the inside. Tighten hardware only finger-

tight at this time.

1 Lock Pin

1 Hitch Pin, 1/2 in. diameter.

1 Large Hairpin Cotter

1 Lock Washer, 5/16 in.

2 Flat Washer, 5/16 in.

1 Standard Nut, 5/16 in.

9 Nylock Nut, 5/16 in.

4 Lock Nut, 1/4 in.

4 Push Connector, 5/16 x 5/8 in.

1Spring

1 Flat Grip

1 Lift Link

Qty. Description

2 Bolt, 5/16 x 2-1/4 in.

2 Clevis Pin, 5/16 x 1-3/8 in.

2 Small Hairpin Cotter

4 Special Flat Washer

2 Nylock Nut, 5/16 in.

2 Standard Nut, 3/8 in.

2 Lock Nut, 3/8 in.

2Vinyl Cap

Qty. Description