Owner manual

4/23/97
3 - 9
ENGINE
SPECIFICATIONS
SERVICE EQUIPMENT AND TOOLS
Order tools from your SERVICEGARD Catalog.
Some tools may be available from a local supplier.
ESSENTIAL TOOLS
OTHER MATERIALS
SCOTCH-BRITE® is a trademark of the 3M Company.
SERVICE PARTS KITS
The following kit is available through your parts catalog:
Camshaft Shim Kit, Oversize Piston and Ring Kits, Undersize Connecting Rod, Oil Pressure Test Kit.
Name Use
Valve Spring Compressor Remove and install valve springs
Telescoping Gauge Measure valve guides
Measure inside diameter of parts.
Outside Micrometer Measure valve stem
Measure outside diameter of parts.
Measure camshaft journals & lobes
Valve Guide Reamer Ream valve guides
Valve Seat Cutter Cut valve seats
Dial Indicator Check push rods and valves for bend
Measure crankshaft end play.
Vacuum Cup Tool Lap valve
Strap Wrench Hold flywheel
Telescoping Gauge Measure camshaft bearing surface
Measure cylinder I.D.
Ridge Reamer Clean cylinder bore.
Piston Ring Expander Remove and install piston rings.
Ring Compressor Install piston.
Ring Groove Cleaner Clean piston ring grooves.
Seal Driver Install oil seals.
Cylinder Hone Bore cylinder block.
Flex Hone Deglaze/crosshatch cylinder.
Oil Pressure Test Kit Perform Oil Pressure Test
Number Name Use
D20020WI Standard Size Valve Guide Reamer
(7.05 mm)
Clean or size valve guide to original
size.
D05351ST Spark Tester Tests spark plug
JDG705 Oversize Valve Guide Reamer
(7.25 mm)
Bores valve guide to proper size for
oversize valve.
Number Name Use
RTV Silicone Sealant Seal valve cover.
Prussian Blue Compound Check valve seat contact.
Valve Lap Compound Lap valves.
SCOTCH-BRITE® Pad Clean cylinder head.
Zinc Oxide/Wood Alcohol Check block for cracks.