Brochure

20
Inch Acetal Shut-Off Valve
The PISV Range of Inch-size Shut-Off Valves is available in 3/8"
and 1/2" tube O.D. size. The Valve is manufactured in gray acetal
copolymer with a nitrile o-ring.
The valves are available with long and short handles to operate a 1/4
turn off action.
Specifically designed for compressed air and potable liquids,
the valves
are ideal for CO
2
lines in beverage dispensing and for
pneumatic applications.
Working Pressures and Temperatures
Air 150 psi at -4˚F (10 bar at -20˚C)
Air/Potable Liquids Max. 150 psi at 33˚F (10 bar at 1˚C)
Max. 150 psi at 73˚F (10 bar at 23˚C)
Max. 100 psi at 150˚F (7 bar at 65˚C)
Detailed technical information is shown on page 24.
Prices are subject to change without notice.
Acetal Shut-Off and
By-Pass Valves
Specifically manufactured in white acetal with EPDM ‘O’-rings,
these valves have been developed to satisfy the requirements
of the US Recreational Vehicle (RV) and Mobile Home (MH)
markets. The valves are for hot and cold water only.
Working Pressures and Temperatures
Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C)
Max. 60 psi at 140˚F (Max. 4 bar at 60˚C)
Min. 34˚F/1˚C
Not IAPMO Listed
SHUT-OFF VALVE
r
SHORT HANDLE
STRAIGHT SHUT-OFF VALVE
r
PART NO. TUBE BOX
OD QTY
PISV0412CS 3/8 100
PART NO. SIZE BOX
CTS QTY
NC2390 1/2 25
SHUT-OFF VALVE
r
LONG HANDLE
BY-PASS VALVES
r
PART NO. TUBE BOX
OD QTY
PISV0412S 3/8 100
PISV0416S 1/2 50
PART NO. SIZE BOX
CTS QTY
*NC2391-RH 1/2 25
**NC2391-LH 1/2 25
The mounting clip is designed to give a very rm grip.
A twisting action is needed to remove the
valve. The clip
can be used with either shut-off valve
.
When used with the
short handle
version, valves can be banked together.
Available for 3/8" O.D. valves.
MOUNTING CLIP
PART NO. SIZE BOX
CTS QTY
SVMC-06 1/4” 200
SVMC-10 3/8” 100
It is the customer’s responsibility to ensure that the installation of John
Guest fittings in CO
2
applications is performed in accordance with the
relevant industry and government safety guidelines.
1/4 Turn Valves. These valves have been
designed to allow temporary servicing of
downstream equipment and must only be used
in the fully open or fully closed position.
DO NOT USE THESE VALVES:
r*OBQBSUJBMMZPQFOQPTJUJPOUPDPOUSPMáPX
r5PQSPWJEFBQFSNBOFOUUFSNJOBUJPO
r8JUIPVUUVCJOHBTTFNCMFEPSQMVHHFEPS
threaded connections sealed).
r"TBUBQPSiGBVDFUu
1/4 Turn Valves are indicated by this
marker ‘r
*RH: Gray Handle
**LH: Black Handle