User manual

Clock functions
Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the time of day
only when the oven is on.
DURATION To set how long the oven works.
END To set when the oven turns off.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set a countdown time. This function has no effect on the operation
of the oven. You can set the MINUTE MINDER at any time and also
when the oven is off.
00:00
COUNT UP TIMER To set the count up, which shows how long the oven works. This
function has no effect on the operation of the oven. It is on immedi-
ately when the oven starts to heat. The COUNT UP TIMER is not
turned on if DURATION and END are set.
Setting and changing the time
After the first connection to the mains, wait until
the display shows and 12:00. "12" flashes.
1. Touch or to set the hours.
2. Touch
.
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch again and
again until starts to flash.
Setting the DURATION
1. Set a heating function and temperature.
2. Press again and again until starts to
flash.
3. Use or to set the minutes for
DURATION time.
4. Press or the DURATION time starts
automatically after 5 seconds.
5. Use
or to set the hours for
DURATION time.
6. Press . The DURATION time starts
automatically after 5 seconds.
When the set time ends, the signal sounds for 2
minutes.
and time setting flash in the display.
The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.
Built-In Double Oven User Manual
16