User manual

Select and start a washing programme
Starting the washing programme
without delay start
1. Switch on the appliance. Make sure that the
appliance is in setting mode.
2. Select a washing programme. Refer to
'Washing programmes'.
• The related programme indicator comes
on.
• The programme time flashes in the
display.
3. Close the appliance door. The washing
programme starts automatically.
Starting the washing programme
with delay start
1. Switch on the appliance. Make sure that the
appliance is in setting mode.
2. Select a washing programme.
3. Press the delay start button until the display
shows the hours for the delay start.
• The hours flash in the display.
• The delay start indicator comes on.
4. Close the appliance door. The countdown
starts automatically.
• When the countdown is completed, the
washing programme starts automatically.
The opening of the appliance door
interrupts the countdown. When you
close the door, the countdown
continues from the point of
interruption.
Cancelling a delay start in progress
Press and hold at the same time, function
buttons (B) and (C) until all the programme
indicators come on.
When you cancel a delay start, the
appliance goes back to setting mode.
You have to set the washing
programme again.
Warning! Interrupt or cancel a
washing programme in progress
only if it’s absolutely necessary.
Hot steam may escape when the
appliance door is opened. Open
the door carefully.
Interrupting a washing programme
in progress
1. Open the appliance door. The washing
programme stops.
2. Close the appliance door. The programme
continues from the point at which it was
interrupted.
Cancelling a washing programme in
progress
Press and hold at the same time, function
buttons (B) and (C) until all the programme
indicators come on. The appliance is now in
setting mode.
Dishwasher user manual 21