User manual

Electrical connection
Warning! The manufacturer
accepts no liability for failure to
observe the following safety
precautions.
• Safety standards require the appliance to be
earthed.
•Prior to using the appliance for the first time,
ensure that the rated voltage and type of
supply on the rating plate match that of the
supply where the appliance is to be installed.
The fuse rating is also to be found on the
rating plate.
• Always plug the mains plug into a correctly
installed shockproof socket.
• Multi-way plugs, connectors and extension
cables must not be used. This could
constitute a fire hazard through overheating.
• If necessary, have the domestic wiring system
socket replaced. In case that the electrical
cable has to be replaced, contact your local
repair agent.
• The plug must be accessible after the
appliance has been installed.
• Never unplug the appliance by pulling on the
cable. Always pull the plug.
• The appliance is supplied with a 13 amp plug
attached. Use a 13 amp ASTA approved (BS
1362) fuse if it is necessary to change the fuse
in the plug supplied.
• This appliance complies with the E.C.C.
Directives.
Dishwasher user manual 33