User manual

ManualsBrandsJohn Lewis ManualsOtherJLBIGGH605

occasionally leaves rough edges. If

necessary, remove stubborn stains

using a paste cleaner.

After cleaning, make sure that the pan

supports are correctly positioned.

To keep the pan supports in the correct

position, they are mounted on metal pins

located in the lateral sides of the hob. To

ensure a better cleaning, pan supports can be

removed from the hob. Lift up the pan

suports keeping them in horizontal position

as shown in figure 2.

Avoid lifting the pan supports atAvoid lifting the pan supports at

Avoid lifting the pan supports at

an angle, as this will put strainan angle, as this will put strain

an angle, as this will put strain

on the metal pins. This mayon the metal pins. This may

on the metal pins. This may

damage the pins and cause themdamage the pins and cause them

damage the pins and cause them

to break.to break.

to break.

PaPa

y attention when ry attention when r

y attention when r

eplacing theeplacing the

eplacing the

pan supports in order to avoidpan supports in order to avoid

pan supports in order to avoid

in order to avoid scratching thein order to avoid scratching the

in order to avoid scratching the

glass hob top.glass hob top.

glass hob top.

The BurnersThe Burners

The Burners

The burner caps and crowns can be removed

for cleaning.

Wash the burners caps and crowns using hot

soapy water, and remove marks with a mild

paste cleaner. A well moistened soap

impregnated steel wool pad can be used with

caution, if the marks are particularly difficult

to remove.

After cleaning, be sure to wipe dry with a soft

cloth.

The Ignition electrodeThe Ignition electrode

The Ignition electrode

The electric ignition is obtained through a

ceramic electrode which contains a metal

electrode (Fig. 1 -

C). Keep these

components very clean, to avoid difficult

lighting, and check that the burner crown

holes (Fig. 1 -

B) are not obstructed.

YES

Fig. 2Fig. 2

Fig. 2