JLBIWM 1402 Built-in 1400 spin washing machine Instruction manual 60° Soak Wool 90° Economy 60° Economy 40° Cold 30° Hand wash JLBIWM1402 Off Rinse Wash time 1400 900 Rinse hold 700 40° 500 30° None Stain Spin Option 60° Economy 40° Delicates 30° 40° Delicates 40° 30° Synthetics Spin Drain Cottons Delay start 30 Minute wash Door lock Child lock Prewash Quick Extra rinse Start/Pause
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Maintenance and cleaning ● Environmental information For information on maintenance and cleaning your washing machine see the relevant chapter of this instruction manual. ● ● Service ● This product should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used. ● After unpacking please dispose of packaging with due regard to safety and the environment. Materials marked with the symbol are recyclable.
Contents For the User For the Installer Important Safety Information 2-3 Installation Child safety 2 2 Description of the Appliance 5 Detergent dispenser drawer Child safety feature 5 5 The Control Panel Before the First use Using the washing machine Load the laundry Measure out the detergent Measure out the fabric softener Switch the machine on Select the desired programme/temperature Select the spin speed or the “None” option Select the desired options Select the “Delay start” Start the programm
Description of the appliance 1 Detergent dispenser drawer 2 Control panel 3 Door handle 4 Rating plate 5 Filter 6 Adjustable feet Detergent dispenser drawer Prewash Main wash Fabric softener Child safety feature This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
The control panel 30 Minute wash Off 90° Economy 60° 1400 Drain 60° Rinse Economy 40° Soak 40° 500 Cold 30° None Stain Spin Option 60° 30° Hand wash Economy 40° Delicates 30° 40° Delicates 40° 30° 900 Rinse hold 700 Synthetics Wool Spin Cottons Delay start Wash time Door lock Prewash Quick 4 5 Extra rinse Start/Pause Child lock 1 2 3 1 Programme selector dial 90° Economy 60° 60° Rinse Economy 40° Soak 40° Cold 30° Hand wash 30° 60° Economy 40° Delicates 30°
Rinse hold: when you choose this option, the 6 Extra rinse button machine will not drain the water of the last rinse, this will ensure the minimum of creasing to laundry. This option can be selected with all programmes, except the Wool programmes and “30 Minute wash”. The machine performs some additional rinses. This option is recommended for people who are allergic to detergents, and areas where the water is very soft.
programme and before you press the Start/Pause button. • Select the programme and the required options. • Select the delay start. • Press Start/Pause button: the machine starts its hourly countdown. The programme will start after the selected delay has expired. This is indicated by the message Err for about 2 seconds when a function incompatible with the current programme is selected. ● An alarm code E20 It indicates a fault with the machine (see the relevant chapter).
First use Child lock approx 6 seconds until the icon disappears from) the display. This function allows you to leave the appliance unsupervised and not to worry that children might be injured by or cause damage to the appliance. This function remains enabled also when the washing machine is not working.
machine on. The Start/Pause light starts to flash and the display shows the duration of the selected programme. To switch the appliance off turn it to “Off”. Wool 90° Economy 60° 60° Rinse Economy 40° Soak 40° Cold 30° 60° 30° Hand wash Economy 40° Delicates 30° 40° Delicates 40° 30° Select the “Delay start” Cottons Off Spin Drain Synthetics 30 Minute wash If you wish the laundry to undergo an extra rinse, select the “Extra Rinse” option.
• The level of the water is not high; If these requirements are met, when you pause the washing machine, the “Door lock” light goes off and the door can be opened. Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by turning the selector dial to “Off”. After a few minutes, you can open the door.
Hints & tips on washing ● Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Wash care symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C.
Washing programmes Fabrics White cotton White cotton White and coloured cotton Programme/ temperature 90° Cottons Economy 60° Cottons 60° 40° - 30° Cottons Consumptions* Energy Water litres kWh Type of laundry Available options Load Sheets, household linen, towels, tablecloths Spin reduction/None Prewash, Rinse hold, Stain, Extra rinse, Quick*** 6 Kg 2.1 57 Sheets, household linen, towels, tablecloths Spin reduction/None Prewash, Stain, Rinse hold, Extra rinse 6 Kg 1.
Washing programmes Programme Programme description Soak Soak for 40 minutes at 30°C Rinse 3 rinses Long spin at max. speed Consumptions* Load Energy kWh Water litres 6 Kg 0.2 29 Spin reduction/ None, Rinse hold Extra rinse 6 Kg 0.1 39 - 6 Kg - - Available options Drain For emptying out the last rinse of the programmes Water draining with option “Rinse hold” and programme “Soak” Spin Drain and long spin at max.
Maintenance and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
Turn off the water tap. Unscrew the water inlet hose. Clean the filter using a hard bristle brush. Tighten up the inlet hose. • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover. BI0003 P1090 • Remove any objects from the pump impeller by The dangers of freezing rotating it. If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap.
Something not working Please carry out the following checks before contacting your local Service Force agent. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom Solution The green Start/Pause light flashes and the display seems off ● The energy save system is enabled. Press the any button to switch the appliance on. The machine vibrates when spinning ● The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum.
Installation It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking All transit bolts and packing must be removed before using the appliance. Keep all packaging away from children. You are advised to keep all the transit bolts for re-use in case the machine is to be transported again. After removing all the packaging, with assistance carefully lay machine on it’s back to remove the polystyrene base from the bottom. Remove the power supply cable, the inlet and the draining hoses from the hose holders on the rear of the appliance.
The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber. There should be a minimum vertical distance of 5.02m (16.
If your drain hose looks like this (see below) you do not require the “U” piece”. Just push the hose firmly into the standpipe. BI0007 BI0008 After having levelled the machine, tighten the lock nuts. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, (see note on positioning), noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration.
Electrical connection If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug. Proceed as follows: Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. 1.The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol or coloured green and yellow.
B 35 Ø 14 prof. 16 -22 416 This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. 600 C Building-in ,5 22+1 600 8 5-59 59 120 176,5 416 818 b) Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5-14 mm depending on the depth of door furniture) on the inner side of the door. The distance between the holes hobs fixing centres must be 416 mm.
Drill four fixing holes see Fig. G If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described.
Repairs - After sales service In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact our extended warranty administrators by telephoning: . ..... .... Mo Pro d. ..... d. No ..... . ..... ..... . Ser . No 0870 01 07887 They will give you details for your local Service Force Centre. Service Force are the appointed national appliance repair agents responsible for warranty repairs to this appliance.
John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.