JLBIWM 1401 Built-in 1400 spin washing-machine Prewash Rinse hold Rinse hold Prewash Quick Extra rinse Stain Quiet Delay start Start/ Pause Drain Spin End JLBIWM1401 Drain Softeners Rinse Soak 30° Filter Wool 500 Spin Spin Rinse 700 On /Off 30 Minute wash Wash 900 Cold 30° 40° Off 95° Economy 60° 60° Economy 40° 40° 30° Cold 60° Economy 40° Delicates 30° 40° Delicates 40° Easy iron 40° Cold Synthetics Programme time 1400 Cottons Instruction manual
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Maintenance and Cleaning ● Environmental Information For information on maintenance and cleaning your washing machine see pages 27 - 28 of this instruction manual. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Contents Maintenance and Cleaning For the User Important Safety Information Description of the Appliance Detergent dispenser drawer Child safety feature The Control Panel Programme information Using the washing machine Load the laundry Measure out the detergent Measure out the fabric softener Switch the machine on Select the desired programme/temperature Select the spin speed or the “Rinse hold” option Select the desired options Select the “Delay start” Start the programme How to change an option or a pro
Prewash Rinse hold 500 Prewash Quick Extra rinse Stain Quiet Delay start Start/ Pause Drain Spin Detergent dispenser drawer Prewash Main wash Fabric softener C0110 Child safety feature This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
Installation It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking All transit bolts and packing must be removed before using the appliance. Keep all packaging away from children. You are advised to keep all the packaging so that they can be refitted if the machine ever has tobetransported again. P0256 4 Set the machine upright and remove the two remaining bolts from the back. Pull out the three plastic spacers from the holes into which the bolts were fitted. Plug the open holes with the plugs supplied with the instruction booklet.
Water inlet Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance to connect to the water supply. Do not use previously used hoses for water connection. P0021 Water drainage P1088 This appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods.
Max. 90 cm (35.4) Min. 60 cm (23.6) 3 pin Loop P1198 P1039 Important The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18 mm. Before connecting the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.
Special conditions It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority. If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine.
Electrical connection 2.The wire coloured blue must be connected to the terminal marked «N» or coloured black. 3.The wire coloured brown must be connected to the terminal marked «L» or coloured red. 4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED.
Building-in 6 This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. 1 1 600 4 2 600 B a) Door The dimensions of the door should be: - width 595-598 mm - thickness 16-22 mm The height (C-Fig. C) depends on the height of the adjacent furniture's base.
Recommendations regarding the construction and fitting of a base when the installation requires an integrated appliance to be raised c) Mounting the door Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges can be adjusted to compensate for possible uneven thickness of the door. To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust the door and tighten the screw again.
Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow. The reason for placing the base in this position is to allow a small strip of beading to be fitted in front of the appliance feet. Fix the base firmly to the floor using four appropriate countersunk screws (see Fig. H).
Prewash Wash 700 Rinse 500 Rinse hold Spin Prewash Quick Extra rinse Stain Quiet Delay start Start/ Pause Drain Spin JLBIWM1401 23 Off Drain Softeners Rinse 95° Economy 60° 60° Economy 40° 40° 30° Soak 30° Filter End 1 Spin Wool Rinse hold On /Off 30 Minute wash 900 Cold Cold 30° 60° Economy 40° 40° Delicates 30° 40° Delicates 40° Easy iron 40° Synthetics Programme time 1400 Cottons The Control Panel Cold 4 1 Detergent dispenser drawer 5 6 7 8 9 11 10 12 To empty o
• “Quick”: select this option for laundry that is only To empty out water there are 2 possibilities: - Select “Drain” programme and then depress the “Start/Pause” button: the water is emptied out without spinning. - Select the “Spin” programme. Select the spin speed by means of the relevant button and then depress the “Start/Pause” button. The water is emptied out and the laundry is spun at the selected spin speed.
9 “Start/Pause” button This button has two functions: • Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit. If you have selected a delay time, the countdown will begin and will be shown on the display. 2.05 • Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing.
The “End” pilot light flashes in the event of operating problems. And the relative alarm code appears on the display. E10 = the machine does not fill E20 = the machine does not empty E40 = the door has not been closed To eliminate the problem, see paragraph “Something not working” (pages 29-30). The delay time is displayed for 3 seconds, then the duration of the selected programme reappears.
Programme information Easy iron 40° Important! The spin speed will automatically assume the setting for cotton items. If required, reduce the speed to the desired level by depressing the "Spin" button. With this programme at 40°C it is possible to wash synthetic garments which must be ironed. The laundry is gently washed and spun to prevent the fabrics from creasing. Max. load 1 kg. Final spin speed 900 r.p.m. Softeners Hand washed garments can be be starched or softened with this programme.
Using the washing machine Before the first wash, we recommend that you run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. Close the drawer gently. 4. Switch the machine on To switch the machine on, press the ON/OFF button: the mains-on light comes on. To switch the appliance off, depress the same button.
6. Select the spin speed or the “Rinse hold” option 8. Select the “Delay start” Before you start the programme, if you wish the start to be delayed, press the “Delay start” button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 23 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again. Press the “Spin” button repeatedly in order to select the desired spin speed or the “Rinse hold” option.
11. How to interrupt a programme 13. End of programme At the end of the programme, the machine stops automatically . The “End” light illuminates. The “Start/Pause” button light goes off and the display shows a flashing zero. If the “Rinse hold” or “Quiet” option has been selected, the “Rinse hold” pilot phase light, the “Quiet” or “Rinse hold” option light remain lit (the door will be locked) to indicate that the water must be emptied out before opening the door. The display shows a flashing zero.
Hints & Tips on Washing ● Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C.
Washing programmes Fabrics White cotton White cotton White and coloured cotton Coloured cotton Programme/ temperature Consumptions* Energy Water litres kWh Type of laundry Available options Load Sheets, household linen, towels, tablecloths Spin red./Rinse hold Prewash, Quick Extra rinse, Stain, Quiet 5 Kg 1.9 52 Sheets, household linen, towels, tablecloths Spin red./Rinse hold Prewash, Extra rinse Stain, Quiet 5 Kg 0.
Washing programmes Consumptions* Programme Programme description Available options Load Energy kWh Water litres 5 Kg 0.3 18 Soak 30° Soak for 30 minutes at 30°C Rinse 3 rinses Long spin at the max speed Spin reduction/ Rinse hold Extra rinse, Quiet 5 Kg 0.1 40 Softeners 1 rinse with liquid additive Long spin at max.
Maintenance and Cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
The dangers of freezing Unscrew and remove the filter. Clean carefully under a fast running tap. If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme. To do this: ● Switch the machine on ● Select the “Drain” programme ● Press “Start/Pause” button ● Disconnect the appliance .
Something Not Working Please carry out the following checks before contacting your local Service Force agent. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom Possible causes Unsatisfactory washing results ● ● ● ● The machine vibrates when spinning ● ● ● ● ● The door will not open ● ● ● Too little detergent or unsuitable detergent has been used. An insufficient amount of detergent leaves the laundry looking grey and causes lime scale to form. Stubborn stains have not been treated prior to washing The correct wash programme/temperature has not been selected. Too much laundry has been placed in the drum. The internal packing has not been removed.
Repairs - After Sales Service Spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact our extended warranty administrators by telephoning: Always insist on genuine spare parts. An authorised service engineer should service this product, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning.
John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.