Dishwasher JLDWS 1228 JLDWW 1222 User manual
Contents Important safety information 3 Description of the appliance 6 Control panel 7 Washing programmes 9 When the appliance is first installed 11 The water softener Filling with salt Filling with rinse aid Daily use 11 12 13 14 Loading cutlery and dishes Use of detergent Multi tab function 14 18 20 Select and start a washing programme 21 Unloading the appliance 23 Maintenance and cleaning 24 Cleaning the filters Cleaning the appliance Prolonged periods of non-operation Frost precauti
Important safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
• • • • • • • • • – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. This appliance is only intended for washing household utensils suitable for machine washing. Do not put any solvents in the appliance. This could cause an explosion. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket.
rinsing phases during the washing programme, depending on the degree of soil on the dishes. This helps to reduce energy and water consumption on lightly soiled loads. • Energy save: This function decreases the temperature in the drying phase. The power consumption is reduced by 25% Environmental information The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings (e.g. >PE<, >PS<) .
Description of the appliance 1 2 3 10 1 9 8 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Control panel 1 2 aid Programmes Auto off Multi tab Energy save Delay start Reset 9 8 7 6 5 4 1. 2. 3. 4. 5. 6. 7. 8. 9. On/off button Indicators Display Delay start button (down) Delay start button (up) Energy save button Multi tab button Programme button (down) Programme button (up) On/off button Press this button to switch on or off the appliance. Programme buttons To select a washing programme, press one of these buttons until the indicator of the programme comes on.
• The activation of the rinse aid dispenser. • The end of a washing programme (the display shows a zero). • The countdown of the delay start. • The alarm codes related to a malfunction of the appliance. • The display shows the time of the washing programme or of the delay start. – Cancel the programme or the delay start to go back to the setting mode. Refer to 'Select and start a washing programme'. Indicators In addition to the programme indicators other indicators help you in the use of your appliance.
Washing programmes Programme Degree of soil and type of load Programme description Functions 45° - 70° Auto 1) Any soil. Crockery, cutlery, pots and pans. Prewash Wash 45 °C or 70 °C Rinses Drying Energy save Multi tab 70° Intensive Heavy soil. Crockery, cutlery, pots and pans. Prewash Wash 70 °C Rinses Drying Energy save Multi tab 60° Quick 2) Normal or light soil. Crockery and cutlery. Wash 60 °C Rinse Multi tab 50° Eco 3) Normal soil. Crockery and cutlery.
Programme Duration (minute) Energy (kWh) Water (litre) 50° Eco 155 0.99 10.8 55° One hour 50 - 60 1.0 - 1.3 10 - 11 Rinse hold 14 0.1 5 The consumption values are intended as a guide. They depend on the pressure and the temperature of the water, on the variations of the power supply and on the quantity of dishes.
When the appliance is first installed Before using the appliance for the first time 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance. 3. Check if the factory set of the water softener complies with the water hardness in your area. If not, adjust the level of the water softener. 4. Pour 1 litre of water into the salt container and then fill with dishwasher salt. 5. Fill the rinse aid dispenser. 6.
Adjusting the level of the water softener The appliance is factory set at level 5. 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Press and hold buttons (8) and (7) simultaneously until the indicators above buttons (9), (8) and (7) start to flash. 3. Release buttons (8) and (7). 4. Press button (9), the indicators above buttons (8) and (7) go off while the indicator above button (9) continues to flash. The display shows the current level (e.g. displayed = level 5 ). 5.
Filling with rinse aid Adjusting the rinse aid dosage The factory set in position 3. You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector (2) to increase or reduce the dosage. 2 1 M AX 4 3 2 1 + - 3 4 Caution! Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Daily use 1. Check if it's necessary to refill with dishwasher salt or rinse aid. 2. Open the door, slide out the baskets and load cutlery and dishes. 3. Fill the detergent dispenser with detergent. • If you use multi-tablets, activate the Multi tab function. 4. Select a washing programme suitable for the degree of soil and the type of load. 5. Start the washing programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water must not be washed in the appliance.
The lower basket The lower basket is designed to take pots, pans, lids, dishes, salad bowls and cutlery. The rows of prongs in the lower basket can lie flat to allow you to load pots, pans and bowls.
The cutlery basket Warning! Knives with long blades, stored in an upright position, are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards Mix spoons with other cutlery to prevent them from sticking together.
25 14 cm cm Caution! Ensure that the spray arms can rotate freely before you close the appliance door. Adjusting the height of the upper basket To load very large plates move the upper basket to the higher position.
24 cm 28 cm 21 25 30 cm cm 28 cm cm 22 cm 4 cm 3 Moving back the upper basket to the lower position 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. Caution! Never lift or lower the basket on one side only. Warning! Always close the appliance door after loading the baskets. An open door can be a hazard. Moving the upper basket to the higher position 1. Pull out the basket until it stops. 2.
Fill with detergent 1 2 30 4 MAX + 32 - 1 20 3 1. Press the release button (2) to open the lid (3) of the detergent dispenser. 2. Put the detergent in compartment (1). 3. If the washing programme has a prewash phase, put a small quantity of detergent on the inner side of the appliance door. 4. If you use detergent tablets, put the tablet in compartment (1). 5. Close the lid. Make sure that it locks into position. Detergent tablets from different manufacturers dissolve at different rates.
Multi tab function This appliance is equipped with the Multi tab function, that allows the use of multi-tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (e.g. 3 in 1, 4 in 1, 5 in 1). Check whether these detergents are suitable for your water hardness. Refer to the manufacturer's instructions.
Select and start a washing programme Starting the washing programme without delay start 1. Open the appliance door. 2. Switch on the appliance. Make sure that the appliance is in setting mode. 3. Select a washing programme. Refer to 'Washing programmes'. • The related programme indicator comes on while the other programme indicators go off. • The programme time flashes in the display. 4. Close the appliance door. The washing programme starts automatically.
Interrupting a washing programme in progress 1. Open the appliance door. The washing programme stops. 2. Close the appliance door. The programme continues from the point at which it was interrupted. Cancelling a washing programme in progress Press and hold at the same time, buttons (8) and (7) until all the programme indicators come on. The appliance is now in setting mode. Make sure that there is detergent in the detergent dispenser before you start a new washing programme.
Unloading the appliance • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Dishwasher user manual • Water may appear on the sides and the door of the appliance as the stainless steel will eventually become cooler than the dishes.
Maintenance and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. Warning! Before cleaning the filters ensure that the appliance is switched off. 1. Open the appliance door and remove the lower basket. 2. Turn the filter (A) counterclockwise and remove it out from filter (B). C C A B 4. Thoroughly clean all parts under running water. 5. Put the two parts of the filter (A) together and push.
Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months you run the washing programme for heavy soiled dishes using detergent but without dishes. Prolonged periods of non-operation 10. Put the filter (A) into position in filter (B). Turn the filter (A) clockwise until it locks. Caution! Never use the appliance without filters.
Something not working The appliance does not start or it stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the table, without calling out an engineer. With some malfunctions, the display shows an alarm code: • - The appliance does not fill with water • • - The appliance does not drain the water - The anti-flood device is on.
Malfunction Possible cause Possible solution The delay start is set. • Cancel the delay start. • When the countdown is completed, the washing programme starts automatically. Once the checks have been carried out, switch off and on the appliance. The programme continues from the point at which it was interrupted. If the malfunction occurs again or the display shows an alarm code that is not listed in the table, please contact our extended warranty administrators.
The washing and drying results are not satisfactory The quality of the multi-tablets can be the cause. Try a different brand or use rinse aid together with the multi-tablets. Activate the rinse aid dispenser. Activating the rinse aid dispenser 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Press and hold buttons (8) and (7) simultaneously until the indicators above buttons (9), (8) and (7) start to flash. 3. Release buttons (8) and (7). 4.
Technical data Dimensions Water supply pressure Width 596 mm Height 850 mm Depth 597 mm Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Electrical connection Information on the electrical connection (voltage, overall power and fuse) is given on the rating plate on the inner edge of the appliance door. Capacity Place settings 12 Power consumption Left-on mode 0.10 W Off-mode 0.
Installation Warning! • It is dangerous to alter the specifications or attempt to modify the appliance in any way. • This appliance is heavy. Care should be taken when moving it. • Care must be taken to ensure that the appliance does not stand on the electrical supply cable. • Any electrical or plumbing work required to install this appliance must be carried out by a qualified electrician or plumber. 570-600 mm 820 mm 600 mm Removing the appliance worktop 1.
Levelling of the appliance 2 3. Lift the worktop (3) and slide it out of the front slots. Good levelling is essential for correct closure and sealing of the appliance door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the appliance door does not close correctly, loosen or tighten the adjustable feet until the level of the appliance is perfect. 3 Insert the appliance once the levelling has been done.
Water connection Water inlet connection This appliance may be fed with either hot (maximum 60 °C) or cold water. Nevertheless we advise you use a cold water supply. A hot water supply is not always efficient with heavily soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the appliance inlet hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-block.
The sink plug must not be in place when the appliance is draining as this could cause the water to syphon back into the appliance. If you use a drain hose extension, the internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
Electrical connection Warning! The manufacturer accepts no liability for failure to observe the following safety precautions. • Safety standards require the appliance to be earthed. • Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. • Always plug the mains plug into a correctly installed shockproof socket.
Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working". If a fault occurs which you can not resolve through following the advice and information contained within this instruction manual, the next step is to contact John Lewis technical support on: 0844 871 7771 They will give you details for your local service engineer.
John Lewis, Oxford Street 020 7629 7711 John Lewis, Norwich 01603 660021 Peter Jones, Sloane Square 020 7730 3434 John Lewis, Nottingham 0115 941 8282 John Lewis, Brent Cross 020 8202 6535 John Lewis, Peterborough 01733 344644 John Lewis, Kingston 020 8547 3000 John Lewis at home, Poole 01202 756020 John Lewis, Aberdeen 01224 625000 John Lewis, Reading 0118 957 5955 John Lewis, Bluewater 01322 624123 John Lewis, Sheffield 0114 276 8511 John Lewis, Cambridge 01223 361292 John Lewis, Solihull 012
Dishwasher user manual 37
Dishwasher user manual
Dishwasher user manual 39
117909311-A-192013 (Subject to change without notice)