JLSS1808 JLFFW1807 frost free fridge freezer Instruction manual
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance andthe relevant warnings. These warnings have been provided in the interest of safety.
For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. WARNING A cut off plug inserted into a 13-amp socket is a serious safety (shock) hazard. Please ensure the cut off plug is disposed of safely. Maintenance and Cleaning Before cleaning, always switch off the appliance and disconnect from the electrical supply.
Contents For the Installer For the User Important safety information Installation Description of the appliance The Control Panel Display Switching the appliance on Switching the appliance off Functions Menu Select /Switch off /Switch on each compartment Switch off of one compartment Ambient Temperature Function Child lock Function Using the refrigerator Drawer Use of the fridge compartment Shopping Function Eco mode Function Drinks Chill Function Air Filter Storing in foods the refrigerator Storage time an
Description of the appliance A - Refrigerator B - Freezer 1. Control panel 2. Air distribution and light box 3. Glass shelves 4. Bottle rack 5. Glass shelf 6. Fresh Box 7. Salad/vegetable drawer 8. Rating Plate 9. Air grid 10. Storing compartment(s) 11. Quick freeze dawer 12. Bottom plinth 13. Adjustable feet 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Installation It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Unpacking The appliance must always be transported in the upright position as indicated on the outside of the packaging. After each transportation the appliance must not be switched on for approx. 2 hours. to ensure the coolant gases settle. Unpack the Fridge Freezer and check for any possible damage. If the appliance is damaged please report this to the John Lewis branch from which you purchased; in this case please retain the packaging.
Installation of the Carbon Filter On delivery the carbon filter is in a plastic bag to maintain it's duration and characteristics. The filter should be placed behind the flap before the appliance is turned on. 1.Pull the flap outwards. (1) 2.Remove the filter from the plastic bag. 3. Insert the filter in the slot found in the back of the flap cover (2). 4.Close the flap cover. During operation, always keep the air ventilation flap closed.
Reversing the fridge freezer doors Should it be necessary, to suit the placement of the appliance in your kitchen, you can reverse the doors. The appliances is delivered with the door opening to the right. Carry out the steps as per the pictures and the instructions. 1. We recommend that you have another person to help you who can safely hold the doors of the appliance secure. 2. Disconnect the appliance from the electrical supply. 3.
19. Place the freezer door on the lower door retaining pin (f) (Fig. 4). 20. Fix the double door mount with 2 screws (c) on the left-hand side. Don't forget the plastic spacer under the door (b) as well. The edges of the doors must run parallel to the side edge of the appliance. 21. Place the fridge door on the double door retaining pin. 22. Remove the top left-hand side door mount (f) and the panel (c) from the plastic bag and attach using the screws (c) (Fig. 1). 23.
Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. Should the appliance power supply cable need to be replaced, this must be carried out by a Service Force agent (see page 22) The manufacturer declines any liability should this safety measure not be observed.
The Control Panel A - Appliance button ON/OFF B - Temperature regulation button C - Temperature and function display D - Function button E - Confirmation button +5°C in the fridge -18°C in the freezer Wait until the inside compartment temperature reach -18°C, before placing food in the freezer compartment. To select a different temperature see "Temperature regulation".
Select /Switch off /Switch on each compartment Temperature selection The temperature may be regulated by pressing the key (D) to select the compartment and then the key (B) to set the desired temperature. By pressing the key (B) the current temperature setting flashes on the indicator. To confirm the choice of temperature press the key (E).You will hear the buzzer for few seconds and the indicator displays the newly selected temperature for a few seconds, then shows again the inside compartment temperature.
Using the refrigerator To maintain the selected cooling temperature within the refrigerator air must be allowed to circulate. Ensure the air circulation gaps behind the shelves are not covered. Always allow hot foods to cool to room temperature before placing into the refrigerator. This will avoid a build up of frost. Foods can transfer or take in odours from other foods.
Drinks Chill Function Storing foods the refrigerator The Drinks Chill function is used for the rapid cooling of the drinks in the freezer compartment. It is activated by pressing key D (several times if necessary) until the corresponding icon appears . You must confirm the choice by pressing key E within a few seconds.You will hear the buzzer and the icon remains lit. In this mode it sets a timer with a default value of 30 min which can be changed from 1 to 90 min, by pressing key B.
Using the freezer Use of the freezer compartment The freezer has the symbol which means that it is suitable for freezing fresh food and for long term storage of frozen and deep-frozen food. Storage of frozen food When first starting-up or after a period out of use, before putting the food in the compartment let the appliance run at least 12 hours.
The freezing process takes 24 hours. During this period do not put other foods in the freezer. This function stops automatically after 52 hours. It is possible to de-activate the function at any time by pressing key D until the corresponding icon flashes and then pressing key E. Storing in the freezer Once the freezing process has been completed all compartments can be used for storage but if you require to freeze further quantities of food move the recently frozen foods to the upper compartments.
Storage time chart (refrigerator) Time and method of storage of fresh foods in the refrigerator Foods Raw meat Cooked meat Roasted meat Raw minced meat Cold cuts,Vienna sausage Fresh fish Cooked fish Fried fish Tinned fish, open Fresh chicken Fried chicken Fresh duck, goose Roasted duck, goose Butter unopened Butter opened Milk Cream Sour cream Cheese (hard) Cheese (soft) Curds Egg Spinach, sorrel Green peas, green beans Mushroom Carrot, roots Bell-pepper Tomato Cabbage Soft fruits (strawberries, raspberrie
Storage time chart (freezer) Storage time of deep-frozen and frozen products Foods In the fresh food compartment +2 - +7°C Vegetables: green beans, green peas, mixed vegetables, marrow, corn, etc. Ready-cooked foods: vegetable dish, trimmings, with meat, etc.
When the refrigerator is not in use If the refrigerator is to be turned off for some time, follow these steps. Unplug the appliance. Remove foods from the refrigerator. Defrost and clean it as written before. Defrost and clean as detailed above. Trouble shooting How to change the bulb Should the light fail to work you can change it as below: Break the circuit of the appliance.
Something Not Working Certain problems are due to a lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Please carry out the following checks before contacting the extended warranty administrators see Repairs - After Sales Service. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Repairs - After Sales Service In the unlikely event of your appliance requiring service, or if you wish to purchase spare parts, please contact our extended warranty administrators by telephoning: 0870 010 7887 They will give you details for your local Service Force Centre. Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”. When you contact your local Service Force Centre you will need to give the following details: 1.
John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.
