User manual

Programme
Default temper-
ature
Temperature
range
Reference
spin speed
Spin speed
range
Maxi-
mum
load
Programme description
(Type of load and soil level)
Steam refresh
-
1 kg
Cottons, Synthetics, Delicates. Short and gentle steam
programme to refresh even your very delicate garments, in-
cluding very delicate garments with sequins, lace etc. When
treating smaller loads, the programme duration can be fur-
ther reduced by means of the Reduce time option.
Warning! Do not use this pro-
gramme with wool and garments
labelled as dry-clean only.
Spin/Drain 1600 rpm
(1600 - 400
rpm)
8 kg
All fabrics, except woollens and delicate fabrics. To
spin the laundry and to drain the water in the drum.
Rinse 1600 rpm
(1600- 400
rpm)
8 kg
All fabrics, except woollens and very delicate fab-
rics. Programme for rinsing and spinning the laundry. The
default spin speed is the one used for cotton programmes.
Reduce the spin speed accordingly to the type of laundry. If
necessary, set the Extra Rinse option to add rinses. With a
low spin speed, the appliance performs delicate rinses and a
short spin.
Machine clean
60 °C
1200 rpm
(1200 - 400
rpm)
-
Maintenance cycle with hot water to clean and freshen the
drum and to remove residue that may cause odour. For the
best result use this cycle once a month. Before running this
cycle, remove all items from the drum. In the washing phase
compartment of the detergent dispenser, put the flap of the
compartment in upward position. Pour a cup of chlorine
bleach or a washing machine cleaner in the washing phase
compartment. DO NOT use both together.
After the drum cleaning, run a further
rinse cycle with empty drum and no de-
tergent to remove any residue of bleach.
If you set this programme with the Mode - Dry, the appli-
ance performs the anti-fluff action. Refer to chapter 'Fluff in
the fabrics'.
Washer Dryer User Manual
23