User manual

In the display the door locked indicator
comes on.
The display also shows the remaining
programme time.
At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they are active).
• In the display
comes on.
• The indicator of button Start/Pause goes off.
The door locked goes off.
The appliance continues to operate with the
anti-crease phase for approximately 30 minutes
or more if Anti-crease option was set.
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-
crease phase is completed. We recommend,
for better results, that you remove the laundry
when the phase is almost completed or
completed. The indicator remains lit.
• Press the button On/Off for some seconds to
deactivate the appliance.
After some minutes from the
end of the programme, the
energy saving function
deactivates the appliance
automatically.
1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum,
the seal and the inside of the door
with a wet cloth.
Washer Dryer User Manual 37