User manual

Warning!
• Do not remove the filter while
the appliance operates.
• Do not clean the pump if the
water in the appliance is hot. Wait
until the water cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
1
2
2. Place a suitable bowl below the drain pump
access to collect the water that flows out.
3. Open the chute downwards. Always keep a
rag nearby to dry up any water spillages when
removing the filter.
4. Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the
water flow out.
5. When the bowl is full of water, turn the filter
back and empty the container.
6. Repeat the steps 4 and 5 until the water stops
to flow out.
7. Turn the filter anti-clockwise to remove it.
1
2
8. If it is necessary, remove fluff and objects from
the filter recess.
9. Make sure that the impeller of the pump can
rotate. If it does not rotate, contact the
Authorised Service Centre.
Washer Dryer User Manual
45