User manual

If the appliance is overloaded, remove some items from the drum and/or hold the
door shut while touching the Start/Pause button until the indicator
stops
flashing (see the picture below).
Warning! Deactivate the appliance before carrying out any
check.
Possible failures
Problem Possible solution
The programme does not start.
• Make sure that the mains plug is connected to the mains socket.
• Make sure that the appliance door is closed.
• Make sure that there is no damaged fuse in the fuse box.
• Make sure that the Start/Pause has been touched.
• If the delay start is set, cancel the setting or wait for the end of count-
down.
• Deactivate the Child Lock function if it is on.
• Check the position of the knob on the selected programme.
The appliance does not fill with
water properly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter of the inlet hose and the filter of the valve are not
clogged. Refer to 'Care and cleaning'.
The appliance fills with water
and drains immediately
• Make sure that the drain hose is in the correct position. The hose may be
positioned too low. Refer to "Installation instruction".
Washer Dryer User Manual 49