User manual

Problem Possible cause Solution
The temperature in the
refrigerator is too high.
There is no cold air circulation in
the appliance.
Make sure that there is cold air
circulation in the appliance.
The temperature in the
freezer is too high.
Products are too near to each
other.
Store products so that there is
cold air circulation.
dEMO appears on the
Display.
The appliance is in
demonstration mode (dEMO)
Keep pressed approximately
10sec theOK button since a long
sound of buzzer is heard and the
Display shut off for a short while:
appliance start works regularly .
Upper or lower square
is shown in the
temperature Display.
An error has occurred in
measuring the temperature.
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
Replacing the lamp
1. Disconnect the mains plug from the
mains socket.
2. Press on the rear hook and at the same
time slide the lamp cover in the direction
of the arrow.
3. Replace the lamp with one of the same
power and specifically designed for
household appliances. (the maximum
power is shown on the light lamp cover)
4. Install the lamp cover by sliding it into its
original position.
5. Connect the mains plug to the mains
socket.
6. Open the door. Make sure that the lamp
comes on.
Replacing the lamp Wine
Cellar
1. Disconnect the mains plug from the
mains socket.
2. Remove the lamp cover by pressing it
inwards with a tool (e.g. screwdriver) to
free the rear side hookings. At the same
time, free the middle hook and slide off
the cover in the direction of the arrows.
24