User manual

2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature
button.
Set default temperature:
•+5°C for the fridge
The temperature indicator shows the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a power failure the set
temperature remains stored.
Drinks Chill function
The Drinks Chill function is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires to
cool down a mixture for a certain lenght of
time.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Temperature colder or
Temperature warmer button to change
the Timer set value from 1 to 90
minutes.
3. Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Drinks
Chill indicator flashes and an audible alarm
sounds:
1. press OK button to switch off the sound
and terminate the function.
It is possible to deactivate the function at any
time during the countdown:
1. Press the Functions button until the
Drinks Chill indicator flashes.
2. Press the OK button to confirm.
3. The Drinks Chill indicator goes off.
It is possible to change the time at any time
during the countdown and at the end by
pressing the Temperature colder button and
the Temperature warmer button.
Fan function
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Fan indicator flashes.
2. Press the OK button to confirm.
The Fan indicator is shown.
To switch off the function:
1. Press the Functions button until the Fan
indicator flashes.
2. Press the OK button to confirm.
3. The Fan indicator goes off.
Important! If the function is activated
automatically the Fan indicator is not shown
(refer to "Daily use").
The activation of the Fan function increase
the energy consumption.
Child Lock function
To lock the buttons from unintentional
operation select the Child Lock function.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
9