JLWM1202 1200 spin washing machine JLWM1403 1400 spin washing machine Instruction manual Wash time Prewash 90° Economy 60° 60° Economy 40° 40° 30° Cold 60° Economy 40° 40° 30° Cold Cottons Off 900 Wash Rinse 700 500 Rinse hold None Drain Spin Spin Prewash Intensive Stain Extra rinse Quiet Delay start Start/ Pause Filter End Synthetics Wool 1200 30 Minute wash Spin Drain Softeners Rinse Soak 30° Cold 30° 40° Delicates 30° Delicates 40° JLWM1202
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Maintenance and Cleaning ● Environmental Information For information on maintenance and cleaning your washing machine see pages 23 - 24 of this instruction manual. ● ● Service ● This product should only be repaired or serviced by anauthorised Service Engineer and only genuine approvedspare parts should be used. ● After unpacking please dispose of packaging with due regard to safety and the environment. Materials marked with the symbol are recyclable.
Contents For the User For the Installer Important Safety Information 2-3 Installation Child safety feature 2 2 Description of the Appliance 5 Door locked light Detergent dispenser drawer 5 5 The Control Panel Installation Technical Specifications Unpacking Positioning Installation on a suspended floor Plumbing in Water inlet Water drainage Levelling In the interest of the environment Electrical connection Permanent connection 11-14 Programme information 15 Using the washing machine Load the l
Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Drain pump 6 Adjustable feet 1 2 Wash time Prewash 90° Economy 60° 60° Economy 40° 40° 30° Cold 60° Economy 40° 40° 30° Cold Cottons Off 900 Wash Rinse 700 500 Rinse hold None Spin Prewash Intensive Stain Extra rinse Quiet Delay start Start/ Pause Drain Spin Filter End Synthetics Wool 1200 30 Minute wash Spin Drain Softeners Rinse Soak 30° Cold 30° 40° Delicates 30° De
Installation It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Unpacking All transit bolts and packing must be removed before using the appliance. Keep all packaging away from children. You are advised to keep all the transit bolts for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses are not squashed. P1128 Positioning Install the machine on a flat hard floor.
Water drainage The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.
Levelling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable (check diagonally). P1212 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place. P1051 Any necessary adjustment can be made with a spanner.
It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority. GREEN & YELLOW 13 A E N L BROWN BLUE Electrical connection P1041 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
The Control Panel 1 2 Wash Rinse 700 500 Rinse hold None Spin Prewash Intensive Stain Extra rinse Quiet Delay start Start/ Pause Drain Spin Filter End JLWM1202 3 4 5 678 Cottons Position “None” By selecting the option “None” all the spinning phases are cancelled. If you select this option with programmes for cotton and synthetics, the machine will perform some extra rinses.
• “Prewash”: select this option if you wish your laundry to be prewashed before the main wash (not available for Wool and “30 Minute wash”). The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. This option can be selected for heavily soiled laundry but not together with “Stain” option. • “Intensive”: this option can be selected for heavily soiled cottons and synthetic.
6 Start/Pause button • The washing machine has stopped with water in the tub, at the end of the “Soak 30°” or a programme with the “Quiet” option: this is indicated by a flashing zero. This button has two functions: • Start: after you have selected the desired programme and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit. If you have selected a delay time, the countdown will begin and will be shown on the display.
The “End” pilot light flashes in the event of operating problems. And the relative alarm code appears on the display. E10 = the machine does not fill E20 = the machine does not empty E40 = the door has not been closed To eliminate the problem, see paragraph “Something not working” (pages 25-26). • An alarm code indicates a fault in the machine operation (see the relevant chapter).
Programme information Soak 30° Drain This is a special programme for heavily soiled laundry. The machine performs a soak of about 30 minutes at 30°C. At the end of the soak time the machine will stop automatically with water left in the tub. The display will show a flashing zero. Pour the detergent for the soak programme into the compartment marked . Before starting a new washing phase, it is necessary to empty the water by selecting the “Drain” programme.
Using the washing machine Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. Close the drawer gently. 4. Switch the machine on Wool 1.Load the laundry Open the door.
6. Select the spin speed or the “None” option 9. Select the “Delay start” Before you start the programme, if you wish the start to be delayed, press the “Delay Start” button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 23 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again. Press the “Spin” button repeatedly button if order to select the desired spin speed or the “None” (no spin) option.
12.How to interrupt a programme 14. End of programme At the end of the programme, the washing machine stops automatically, the “End” light illuminates, the “Start/Pause” button light goes off and the display shows a flashing zero. If you had selected the “Quiet” option, the door locked light is on, the door is locked, the “Rinse Hold” pilot light and the “Quiet” option light remain lit to indicate that the water must be drained. The display shows a flashing zero.
Hints & Tips on Washing ● Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. WASHING SYMBOL WASH ACTION 95 Normal (Maximum) White Cotton or Linen without Special Finishes 60 Normal (Maximum) Cotton, Linen or Viscose without Special Finishes Colourfast at 60°C.
Washing programmes Fabrics White cotton White cotton Programme/ temperature 90° Cottons 90° Cottons + INTENSIVE Consumptions* Energy Water Time litres kWh h/min. Available options Load Sheets, household linen, towels, tablecloths Spin reduction/None Prewash, Intensive Stain, Extra rinse Quiet 6 Kg 2.1 57 1.39 Sheets, household linen, towels, tablecloths Spin reduction/None Prewash, Stain, Extra rinse, Quiet 6 Kg 2.3 57 2.
Programme Programme description Available options Consumptions* Load Energy kWh Water litres Time h/min. 6 Kg 0.23 19 28 Soak 30° Soak for 30 minutes at 30°C Rinse 3 rinses Long spin at max. speed Spin reduction/ None Extra rinse Quiet 6 Kg 0.06 59 45 Softeners 1 rinse with liquid additive Long spin at max.
Maintenance and Cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
• When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover. Tighten up the inlet hose. P1090 The dangers of freezing P1115 If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose. ● Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.
Something Not Working Please carry out the following checks before contacting your local Service Force agent. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptom Solution The machine vibrates when spinning ● ● ● ● ● The door will not open The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not level and stable (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. ● The water level is above the bottom edge of the door. The machine is heating the water. ● The drum is turning.
John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.