User manual

Important! If you deactivate the
appliance, it is necessary to set the
programme again.
End of programme
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
•
The indicator of the Start/Pause button 4
goes off.
• The door lock symbol goes off.
•
Press button 1 to deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance again,
the display show the end of the last set
programme. Turn the programme
knob to set a new cycle.
• Remove the laundry from the appliance. Make
sure that the drum is empty.
• Keep the door ajar, to prevent mildew and
odours.
• Close the water tap.
The washing programme is completed,
but there is water in the drum:
– The drum turns regularly to prevent the
creases in the laundry.
–The door stays locked.
– You must drain the water to open the door.
To drain the water:
1. If necessary, decrease the spin speed.
2.
Press the Start/Pause button 4. The
appliance drains the water and spins.
3. When the programme is completed and the
door lock symbol goes off, you can open
the door
4. Deactivate the appliance.
The appliance drains and spins
automatically after approximately 18
hours.
Washing Machine user manual 15