JLBIIH603 Ceramic glass induction hob Instruction manual
Important Safety Information 1 Itence. is most important that this instruction manual should be retained with the appliance for future referShould the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Contents For the User Important Safety Information Description of the Appliance The control panel For the Installer 2 Installation 4 · Technical Specifications · Electrical Connection · Electrical Requirements 5 5 6 6 Building In 7 · Touch Control sensor fields · Displays · Residual heat indicator · Switching the appliance on and off 11 11 11 12 12 · Selecting the heat setting 12 · Locking/unlocking the control panel 12 · Using the child safety device 13 · Switching the power function on and
Description of the Appliance Cooking surface layout Induction cooking zone 1800 W Induction cooking zone 1400 W Induction cooking zone 2200 W with power function 2800 W Control panel 4 Induction cooking zone 1800 W with power function 2800 W
Installation 1 It is dangerous to alter the specifications or attempt to modify this product in any way. 1 Care must be taken to ensure that the appliance does not stand on the electrical supply cable. 1 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Electrical Connection Important After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 60°C above the ambient temperature. Before the hob is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed. The manufacturer disclaims any responsibility should these safety measures not be carried out. 1 This hob must be earthed.
Building In 7
The control panel 1 2 3 8 1: 2: 3: 4: 5: 6: 7: 8: 4 6 7 5 Display Heat setting selection Cooking zone indicators Timer function Timer display Power function Lock Timer On/Off with power indicator Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Residual heat indicator 1 Warning! Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indica. tor 3 Residual heat can be used for melting and keeping food warm. The induction cooking zones create the heat required for cooking directly in the base of the cookware. The glass ceramic is merely heated by the residual heat of the cookware.
Using the child safety device The child safety device prevents unintentional use of the appliance. Setting the child safety device Step Control panel 1. Switch on the appliance (Do not set a heat setting) 2. Touch 3. Touch Display/Signal until the signal sounds Acoustic signal Appliance switches off. The child safety device is set. Overriding the child safety device The child safety device can be released in this way for a single cooking session; it remains activated afterwards. Step 1.
Switching the power function on and off The power function makes additional power available to the front induction cooking zones, e.g. to bring a large volume of water to the boil. The power function is activated for 8 minutes for the front left cooking zone and for 5 minutes for the front right cooking zone. After these times, the induction cooking zones automatically return to cooking level .
Using the timer All cooking zones can use each use one of the two timer functions at the same time. Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes 3 If a cooking zone is switched off, the timer function set is also switched off.
Setting time Step 1. Control panel Grill setting Selecting cooking zone Telltale of cooking zone selected flashes from the selected 01 to 99 minutes 2. Touch or cooking zone 3. Touch or from the selected ... 05...10...15... 20 or... 95... 90... 85... 80... (5-minute steps for cooking zone for more than 4 seconds easy setting) After a few seconds the power indicator flashes more slowly. The time is set. The time counts down. Switching off the Timer function Step 1. 2.
Safety cut-out Cooking surface • If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds. Control panel 3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel immediately switches all cooking zones off.
When the hob is first installed 1 Remove all packaging, both inside and outside the hob including the advertising labels and any protective film, before using the hob. 3 When a cooking zone is switched on, it may hum briefly. This is a characteristic of all ceramic glass cooking zones and does not impair either the function or the life of the appliance.
Hints and Tips on Cooking and Frying 3 Information about acrylamides According to the latest scientific research, intensive browning of food, especially in products containing starch, may present a health risk due to acrylamide. Therefore we recommend cooking at low temperatures and not browning foods too much.
Cooking chart 3 This chart is intended as a guide only. It may be nec- essary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements. Heat setting Cooking process 0 suitable for Cook time Tips/Hints Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins.
Maintenance and Cleaning 1 Warning! Risk of burns from residual heat. 1 Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
Something Not Working If the hob is not working correctly, please carry out the following checks, before contacting your local Service Force repair agent. In the event of any other fault codes that arise, disconnect the appliance from the electrical supply for a few seconds (take out the fuse from the housing wiring system). If the fault code is displayed again, please call your local Service Force repair agent and report the fault code.
Repairs - After Sales Service If your hob is not performing satisfactorily; consult the fault finding guides within this instruction book (Something not working). If a fault occurs which you can not resolve through following the advice and information contained within this instruction manual, the next step is to contact our extended warranty administrators on 0870 0107887 They will give you details for your local Service Force Centre.
John Lewis Partnership 171 Victoria Street London SW1E 5NN www. johnlewis.