Installation Guide
Quantity: 16
Wall Anchor / Anclaje de pared / Boulon d’ancrage
Quantity: 2
#4 3/4 in. / 1.9 cm / 19 mm
Quantity: 16
#8 1 1/2 in. / 3.81 cm / 38,1 mm
Quantity: 2
Barrel Nut
Tuerca Cilindrica
Écrous á Portée Cylindrique
Quantity: 2
Barrel Bolt
Perno Cilindrica
Boulbons Cylindric
Quantity: 4
#6 3/4 in. / 1.9 cm / 19,05 mm
PARTS LIST Lista De Piezas Liste Des Piéces
IMPORTANT: DO NOT RETURN TO STORE!
For missing or damaged parts, technical or assembly questions, please call John Louis Customer
Service at 1-800-480-6985
IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA!
Llame al servicio al cliente local de John Louis al 1-800-480-6985
para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.
IMPORTANT: NE PAS RENVOYER OU RAPPORTER AU MAGASIN!
Si vous avez une question concernant l’assemblage, des piéces manquantes ou endommagées ou
un probléme technique, appelez le Service á la clientéle de John Louis au 1-800-480-6985.
12IN. & 16IN. x 6FT. TOWER KIT
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES PARA EL ARMADO DEL JUEGO DE
LA TORRE DE 30.48 CM. Y 60.64 CM. x 1.82M
INSTRUCTIONS DE MONTAGE DU NÉCESSAIRE DE
COLONNE 30,5cm x 40,5cm x 182cm
Quantity: 2
Shelf mounting L- Clip
Estante clip de montaje
Clip tablette
Quantity: 4
Tower Bracket Hardware
Ménsula Para la Torre
Supports de Colonne
Quantity: 4
Mushroom Cap
Tapa en forma de hongo
Chapeau de vis
Quantity: 4
Cam Lock Nut
Tuerca Cilindrica
Boitiers Excentriques
Quantity: 4
Cam Bolt
Perno Pasador
Goujons D’Assemblage Rapide
Quantity: 1
Allen wrench / Llave Allen / Clé Allen
Quantity: 2 72 in. Tower Side / Torre Lateral de 1,8 m / Côté Tour de 183 cm
Quantity: 1 24 in. Tower Bottom / Base De Torre de 60.96 cm / Tablette Inferieure
Collonne de 609.6 mm
Quantity: 1 26.25 in. Tower Top / Superior De Torre 66.6 cm / Tablette Supéri-
eure de Collonne de 666.75 mm
STEP 1 - Tower Assembly
1. Place tower sides down with grooves facing up.
2. Secure Cam Bolt into locations at bottom of tower sides.
3. Insert Cam Lock into Tower Bottom locations for each side.
4. Secure Tower Sides and Tower Bottom together by turning cam locks
clockwise to tighten.
5. Insert Barrel Nut into locations at top of tower sides.
6. Place Tower Top into notched position of tower sides.
7. Insert Barrel Bolt into location and tighten using supplied allen wrench