Installation Guide

7
12. Position shelf end template onto tower side.
13. Align template line with adjacent wall line.
14. Level template.
15. Mark required Shelf End position for required depth (12in. or 16in. depth).
16. Secure using Shelf End #8 - 3/4in. screws.
17. Double check required shelf measurement. Cut Shelf if necessary.
18. Place shelf into shelf end hardware & onto L-clip hardware.
19. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
20. Repeat hardware mounting steps for additional secondary shelf.
21. Double check required shelf measurement. Cut Shelf to required width.
22. Place shelf into shelf end hardware & onto L-clip hardware.
23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
12
13
16
14
15
18 19
19
12
13
1614
15
7 8
9
10
11
11
22
23
21
23