Install Instructions

MNEZ123 111820
– 18 –
Model EZ 1,2,3 and LF Oil/Bio-fuel Burners — Instruction Manual
8. Repair Parts
Item Description Part No.
1
Air tube, 4" nominal, approx. 4-3/8"oal (EZ 1), ange 77719
Air tube, 5" nominal, approx. 5-3/8" oal (EZ 1), ange 77727
Air tube, 7" nominal, approx. 7-3/8" oal (EZ 1), ange 77735
Air tube, 9" nominal, approx. 9-3/8" oal (EZ 1), ange 77743
Air tube, 11" nominal, approx. 11-3/8" oal (EZ 1), ange 77750
Air tube, 5" nominal, approx. 5-1/4" oal (EZ 2 & 3), ange 83816
Air tube, 7" nominal, approx. 7-1/4" oal (EZ 2 & 3), ange 83824
Air tube, 9" nominal, approx. 9-1/4" oal (EZ 2 & 3), ange 83832
Air tube, 11" nominal, approx. 11-1/4" oal (EZ 2 & 3), ange 83840
Air tube with welded ange, for specic appliance (contact factory) —
Air Tube, 4" nominal, approx. 4-3/8" oal (EZ LF) ange 99802
Air Tube, 4" nominal, approx. 5-3/8" oal (EZ LF) ange 99914
Air Tube, 4" nominal, approx. 7-3/8" oal (EZ LF) ange 99780
Air Tube, 4" nominal, approx. 9-3/8" oal (EZ LF) ange 50017
Air Tube, 4" nominal, approx. 11-3/8" oal (EZ LF) ange 50699
2
Motor, 1/6 hp, 3450 rpm, Carlin PSC 98022
3
Electrode wire, set of 2, 4" nominal, approx. 5-1/2" oal (EZ 1 only) 82750
Electrode wire, set of 2, 5" nominal, approx. 6-1/2" oal 82768
Electrode wire, set of 2, 7" nominal, approx. 8-1/2” oal 82776
Electrode wire, set of 2, 9" nominal, approx. 10-1/2” oal 82784
Electrode wire, set of 2, 11" nominal, approx. 12-1/2” oal 82792
4
Nozzle line/adaptor assembly, 4" nominal, approx. 5-3/4" oal
(EZ 1 only)
56804
Nozzle line/adaptor assembly, 5" nominal, approx. 6-3/4" oal 56820
Nozzle line/adaptor assembly, 7" nominal, approx. 8-3/4" oal 56861
Nozzle line/adaptor assembly, 9" nominal, approx. 10-3/4" oal 57315
Nozzle line/adaptor assembly, 11" nominal, approx. 12-3/4" oal 56754
5
Ignitor, Carlin electronic 45000
6
Oil valve (optional) SVC10FF
7
Fuel unit, Suntec A2VA-30061B, w/tting 98750S
8
Oil line, 3/16 od, oil valve to nozzle line 34439
9
Oil line, 3/16 od, std. fuel unit to nozzle line 34470
10
Coupling, for std. fuel units, approx. 2-3/8" oal 75564
11
Air band (EZ 1), with 100 PSIG scale 98055
Air band (EZ 2), with 100 PSIG scale 98087
Air band (EZ 3), with 100 PSIG scale 98089
Air Band (EZ LF), Single 98100
Air Band (EZ LF), Dual 98101
Air Band (EZ LF), EZ 50919
12
Air shutter, blank (EZ 1) (EZ LF) 97780
Air shutter, one slot (EZ 1) 98052
Air shutter, three slots (EZ 2) 98109
Air shutter, four slots (EZ 3) 98108
Air Shutter Blank (EZ LF) 46938
Item Description Part No.
13
Head positioning bar kit w/7 bars & thumb screw (EZ 1, EZ-1-HP) 98078
Head positioning bar kit w/4 bars & thumb screw (EZ 2, EZ-2-HP) 84715S
Head positioning bar kit w/3 bars & thumb screw (EZ 3, EZ-3-HP) 86389S
Head positioning bar kit w/6 bars 99831
Limited adjustment head positioning bar kit w/5 bars 98115
14
Combustion head assembly 4" (EZ 1,2,3,LF) 77941
Combustion head assembly 5" (EZ 1,2,3,LF) 77958
Combustion head assembly 7" (EZ 1,2,3,LF) 77966
Combustion head assembly 9" (EZ 1,2,3,LF) 77974
Combustion head assembly 11" (EZ 1,2,3,LF) 77982
Combustion head assembly 4" w/bafe 99801A
Combustion head assembly 5" w/bafe 99801C
Combustion head assembly 7" w/bafe 99801E
Combustion head assembly 9" w/bafe 99801G
Combustion head assembly 11" w/bafe 99801J
15
Electrode bracket 23135
16
Bracket, nozzle line heater 64493
17
Nozzle line heater w/electrical disconnect (optional) 66795
18
E-ring for nozzle line 50624
19
Thumb nut, nozzle line 62885
20
Gasket, ignitor 40167
21
Cad cell 4002400A
22
Ignitor terminal kit, (2 terminals & nuts) 24463
23
Ignitor hold-down tab, two required 44842
24
Junction box, 4"x4", w/grommet and lockwasher 44586
25
Blower wheel, 5-1/16d x 2w 77933
26
Primary control (consult factory for other controls) 70200
27
Welded ange, when supplied (contact factory) —
27a
Mounting ange, 3-1/2 id x 8-1/4 od Universal ange 81364
28
Gasket, mounting ange 40287
29
Pedestal w/hardware 23317
30
Screw, head positioning bar 98349
31
Flame retention ring assembly 77438
32
Nozzle (obtain locally) —
33
Housing 50685A
34
Plug-in wire harness, when supplied (contact factory) —
35
Elbow, 3/16 are x 1/8 NPT 29926
36
Optional Valve and Pump —
37
Fuel unit, std. single stage, Suntec A2VA-7116B, w/tting 22996
38
Elbow 118-2671-001
39
Nipple 29322
40
Access cover w/deector (EZ 1,2,3,LF) 99282A
Access cover w/o deector (EZ 1,2,3,LF) 98281A
Access cover w/36 hole blender (EZ LF) 9975601A
Access cover w/28 hole blender (EZ LF) 9975601B
For parts not shown or listed, contact factory and/or check separate documentation supplied with appliance/burner unit.