Use and Care Manual

MNEZ123 072916
– 20 –
Model EZ-1/2/3 oil burners — Instruction manual
For other than routine maintenance, con-

the following as needed.
Keep the area around the burner clear
and free from combustible vapors and
liquids.
 
and ventilating air.
Most motors currently used on resi-
dential type burners use permanently-
lubricated bearings, and do not require

motor to determine oiling needs, if any.
Do not over-lubricate. This can cause
as much trouble as not lubricating at all.
Never attempt to use gasoline as
a fuel for this burner, as it is more
combustible and could result in
a serious explosion. Never at-
tempt to burn refuse or use any
!"#
oil (ASTM D396).
EZ-1/2/3 Oil Burner
User Care and Maintenance
Refer only to the information on
this page, intended for your use.
The remainder of this manual is
intended only for your service techni-
cian. Failure to comply could result
in severe personal injury, death or
substantial property damage.

 Shut off the oil supply to the burner.
 DO NOT shut off the control switch to
the circulator or blower.
 Contact your oil dealer or service
$
needed).
The burner must be cleaned, tested and
%
service technician.

Summary of content (1 pages)