User's Guide Part 1

*
Some models.
4 – 18
When Driving
Instrument Cluster and Display
Active Driving Display (ADD)
*
Optical receiver
Mirror
Combiner
WARNING
Adjust the brightness or the display position only when the vehicle is stopped and
always make sure you are engaged in safe driving:
If you attempt to make the adjustments while the vehicle is moving, it could lead to an
unexpected accident.
CAUTION
 Do not try to adjust the angle or open/close the Active Driving Display (ADD) manually.
Fingerprints on the display will make it di cult to view and using excessive force when
operating it could cause damage.
 Do not place objects in the vicinity of the Active Driving Display (ADD). The Active Driving
Display (ADD) may not operate or any interference with its operation could cause
damage.
 Do not place beverages near the Active Driving Display (ADD). If water or other liquids are
splashed on the Active Driving Display (ADD), it could cause damage.
 Do not place objects above the Active Driving Display (ADD) screen or apply stickers to the
combiner as they will cause interference.
 A sensor is integrated to control the display's luminosity. If the optical receiver is covered,
the display's luminosity will lower making the display di cult to view.
 Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.
Mazda3_8CX9-EA-13F_Edition1.indb 18Mazda3_8CX9-EA-13F_Edition1.indb 18 2013/05/17 11:49:282013/05/17 11:49:28