User's Manual

Johnson Controls BlueConnect
Suggested User Guide Text
CONFIDENTIAL
June 10, 2003
This document contains information that is proprietary to Johnson Controls, Inc. and the information
is not to be copied, sent, or otherwise communicated to third parties.
9
7
The system prompts you for a phone name. Name it something easy to remember.
Say the phone name, for example, "Jacob's phone".
8
To complete the pairing process, the system will now ask you for a phone priority
from 1 to 7. Number 1 is the highest priority. If two phones are paired, the
Blueconnect will use the higher priority phone when both phones are within range.
Say the phone priority, for example, "One".
9
When complete, the system indicates "Pairing Complete”.
Clear Paired Phone(s)
To remove a communication link between the Blueconnect module and your cellular phone(s), you must
clear the paired phone(s).
CAUTION
After clearing a paired phone (or all phones), if you attempt to use Blueconnect
to make a call with that phone, Blueconnect responds with "Phone not
available".
NOTE
If you make a mistake during the clearing process or decide not to clear a
phone, press either Blueconnect’s Phone button or VR button to exit the clearing
mode.
NOTE
To re-prioritize the cell phones being used, you must first clear the phone(s)
paired with Blueconnect.
STEP CLEARING PAIRED PHONE(S)
1
On the Blueconnect’s module, press the phone button and say "Setup".
2
Say "Phone Pairing".
3
After the system prompts you, say "Delete a phone”.
4
The system prompts you for the name of the phone to clear.
Say the phone name; for example "Jacob's phone".
5
Blueconnect responds with a verification to clear the selected phone.
If correct, say "yes" (say "no" to start the delete process over).
6
When complete, the system indicates "Deleted".
Setu
p