User Manual

14
Draft Copy
Using the Phone
Pairing/Unpairing a Phone
Pairing a Phone to the HFTM System
To use your HFTM, you must first pair it (register the system with the phone) with a Bluetooth hands-free-
profile-enabled cellular phone. Please refer to your phone manufacturer's owner's manual for instructions
on how to place your cellular phone into pairing mode.
CAUTION
The pairing process requires operation of your mobile phone. For safety, only perform
while the vehicle is stopped.
NOTE
The following pairing procedure is for the Nokia 6310i cellular telephone.
NOTE
In order to complete successful pairing, both the cellular phone and the HFTM must be in
pairing mode at the same time. The HFTM remains in pairing mode for about three
minutes before timing out.
STEP PAIRING A PHONE TO THE HFTM SYSTEM
1
Press the HFTM module's pickup button and say "Phone Options".
The system prompts you with available options.
2
Say "Pair".
3
The system will then ask for a 4-digit code. This can be any number you choose as
long as you enter the same number on the phone in a minute.
Say your four-digit code. For example, "One-Two-Three-Four".
The system repeats your code.
4
Press and hold the pickup button for 1.2 seconds.
Or, push the pickup button and say "Enter".
The system says it is entering discovery mode.
5
At the Nokia 6310i phone's "T-Mobile" screen, press the Menu button.
6
Press the phone's down-arrow button until you reach the "Bluetooth" screen
(you will page through quite a few screens). When you see it, press the
Select button.
Continued…
Choice
Pairing a Phone