User Manual

17
Draft Copy
Making Calls
Making Calls by Entering Numbers in Single String Format with
the "Call/Dial" Command
STEP MAKING CALLS BY ENTERING NUMBERS IN SINGLE STRING
FORMAT WITH THE "CALL/DIAL" COMMAND
1
Press the pickup button and say "Call" or "Dial".
You are asked what name or number you want to call.
2
Say the number such as "6165555555" (a continuous number string).
The number is repeated to you.
3
Press and hold the pickup button for 1.2 seconds.
Or, say "Call" or "Dial".
You are told the number is being dialed and the number is dialed.
Making an Outgoing Call by Entering Numbers in Block Format
STEP MAKING AN OUTGOING CALL BY ENTERING NUMBERS
IN BLOCK FORMAT
1
Press the pickup button and say "Call" or "Dial".
You are asked what name or number you want to call.
2
Say the number in block format.
Example:
Say the area code such as "616". The HFTM says "616".
Then say the next three digits such as "399". The HFTM says "399".
Then say the final four digits such as "3333". The HFTM says "3333".
3
After you start entering blocks of numbers, say "Verify Number" and all
numbers (all blocks) you have spoken up to that point are read back to you.
4
Press and hold the pickup button for 1.2 seconds.
Or, say "Call" or "Dial".
You are told the number is being dialed and the number is dialed.
Choice
Choice
Making Calls with a
Number Block
Making Calls with a
Number String