Product Overview

ManualsBrandsJohnson Controls ManualsDampersPneumatic Actuator with Universal Mounting Bracket (8-13 PSIG)

FANs 268.1, 1628.3

Product Bulletin D-3153

Issue Date 0596

Code No. LIT-2681054P

D-3153 Pneumatic Actuator

The D-3153 Pneumatic Actuator is a multipurpose

positioning device used primarily for operating

ventilating dampers in response to the output signals

of a pneumatic controller or electro-pneumatic

transducer.

The D-3153 can be used with dampers up to a

maximum area of 16 square feet for proportional

volume control and 25 square feet for two position

actuation provided that the torque requirements are

compatible with the specific application.

The D-3153 is UL component recognized for use on

UL classified 555/555S smoke and combination

fire/smoke dampers which have been tested and

approved to a degradation temperature of 250°F

(121°C).

Figure 1: D-3153

Features and Benefits

❑

All-aluminum Housing

Lightweight, non-combustible

❑

Telescoping Linkage

Fast, flexible installation

❑

Long Life and Reliable

Over a million now in service

❑

2-way Swivel Head

Ensures full power delivery

❑

Agency Recognized

UL Recognized component for fire and smoke

applications to 250°F (121°C)

Summary of content (4 pages)

PAGE 1
FANs 268.1, 1628.3 Product Bulletin D-3153 Issue Date 0596 D-3153 Pneumatic Actuator The D-3153 Pneumatic Actuator is a multipurpose positioning device used primarily for operating ventilating dampers in response to the output signals of a pneumatic controller or electro-pneumatic transducer.
PAGE 2
A pplication I nstallation When used with proportional control, the damper size is limited to 16 square feet maximum. As a 2-position control, damper size is limited to 25 square feet. Two standard mounting packages are available with the D-3153 pneumatic piston actuator.
PAGE 3
D imensions P isto n R o d E xten sion S et S crew S wiv e l B a ll Jo int M axim u m T ele sco p ing 6-1/2 (1 65 ) Crankarm 2 -1 /4 (5 7) 5-1 /4 (1 3 3) 7 -2 3/3 2 (19 6 ) 1 1-5 /8 (2 9 5) Figure 2: D-3153, inches (mm) D -9502 P ositioner 8-7 /8 (2 2 5) 6- 9/1 6 (167 ) 15-7/16 (39 2 ) 6-9/32 (16 0) Figure 3: D-3153 with Universal Mounting Bracket, inches (mm) D -95 0 2 P o sitio ne r 7 -7 /8 (20 0 ) P ositio n B 3 -2 5/3 2 (96 ) 5-9/1 6 (1 41 ) P iv o t P o st A u xilia ry M o un ting B ra ck
PAGE 4
Table 3: Accessories Description Shipping Weight lb (Kg) Code Number Rubber Boot Kit 0.2 (0.09) D-3073-100 Ball Joint weather resistant 0.3 (0.11) D-3073-604 Blade Arm Kit 1.0 (0.45) D-9999-100 Crank Arm 1/2 inch adjustable to 2-3/4 inch radius 0.5 (0.23) D-3153-101 Crank Arm 3/8 inch adjustable to 2-3/4 inch radius 0.5 (0.23) D-3153-108 Crank Arm 7/16 inch adjustable to 2-3/4 inch radius 0.5 (0.23) D-3153-109 Linkage Rod 4 ft. (122 cm) 2.0 (0.