Product Overview

FCP Non-Programmable and Progammable Fan
Coil or PTAC Thermostat Product Bulletin
Description
The FCP Non-Programmable and FCP 7-Day
Programmable Fan Coil Unit (FCU) or Packaged Terminal
Air Conditioner Unit (PTAC) Thermostats provide simple-
to-use control of 2-pipe or 4-pipe FCU or PTAC. These
thermostats provide on/off control, up to three speeds
of fan control, and dry contact unoccupied or occupied
control. Use the thermostats as stand-alone devices in
commercial buildings, such as schools, offices, and hotels,
and to provide access to parameters such as system
mode, fan mode, and temperature setpoints.
The FCP Thermostats feature a quick setup menu, are
prewired for fast installation, and are Johnson Controls
®
10k ohm negative temperature coefficient (NTC) Type
Ⅱ and Type Ⅲ remote sensor ready (order separately).
You can equip the FCP Thermostats with a remote
temperature sensor, remote pipe sensor, and a remote
wired occupancy sensor to enable flexible options. Flexible
options include 2-pipe FCU heat/cool switchover or pipe
sensor for automatic switching. The large display with
adjustable backlight makes it easy to optimize user
preferences. In addition, both FCP Thermostat models
include min and max temperature protection, key pad
lockout, occupied and unoccupied modes.
Figure 1: FCP Thermostat
Product overview
Figure 2: FCP Thermostat
Table 1: FCP Thermostat UI call outs
Feature Description
1 Schedule, available only on FCP-PA-701
2 Time, available only on FCP-PA-701
3 Room temperature
4 Temperature setpoint
5 Fan speed
6 Fan
7 Up
8 Down
9 Mode
10 Cool or heat indication
11 Day, available only on FCP-PA-701
LIT-12013641
2020-09-21
FCP-NA-701, FCP-PA-701