User Guide
Table Of Contents
M9000-560 Ball Valve Linkage Kit and M9000-561 Thermal Barrier Installation Instructions 11
5. Insert fixed pointer and M4x0.7x83 mm long screw
into the Side B actuator hub. Direct the arrow on
the pointer to 0%.
6. Install the actuator on the ball valve. Tighten the
actuator mounting screw to a torque of
10 to 12 lb·in. (1.1 to 1.4 N·m) and snap the large
adjustable pointer into place.
Figure 26: Installing the Fixed Pointer
Figure 27: Mount the Actuator