User Guide

M9000-560 Ball Valve Linkage Kit and M9000-561 Thermal Barrier Installation Instructions8
4. Install linkage base on Side A using the two
#8-32 x 0.625 in. long screws (Figure 15). The
recommended torque is 29 to 33 lb·in.
(3.3 to 3.7 N·m).
5. Insert fixed pointer and M4x0.7x83 mm long screw
into the Side B actuator hub (Figure 16). Direct the
arrow on the pointer to 0%.
6. Install the actuator on the ball valve (Figure 17).
Tighten the actuator mounting screw to a torque of
10 to 12 lb·in (1.1 to 1.4 N·m) and snap the large
adjustable pointer into place.
Figure 15: Installing the Linkage
F
I
G
:
I
N
S
T
_
L
N
K
Figure 16: Installing the Fixed Pointer
F
I
G
:
I
N
S
T
_
F
X
P
T
_
B
Figure 17: Mount the Actuator
F
I
G
:
M
N
T
_
A
C
T
_
B