Manualshelf

Product Overview

ManualsBrandsJohnson Controls ManualsDampersM9104 24V Floating Non-Spring Return Actuator (35 lb-in)
123
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
2 of 3
Electric Non-Spring Return Actuators (Continued)
Selection Chart
Accessories
Code Number Control Type Running Torque Travel Time Electrical Connections
M9102-AGA-2S Floating 18 lb·in (2 N·m) 30 Seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable
with 19 AWG (0.75 mm
2
) conductors and 1/4 in. (6 mm)
ferrule ends
M9102-AGA-3S Floating 18 lb·in (2 N·m) 30 Seconds at 60 Hz M3 Screw Terminals
M9104-AGA-2S Floating 35 lb·in (4 N·m) 60 Seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable
with 19 AWG (0.75 mm
2
) conductors and 1/4 in. (6 mm)
ferrule ends
M9104-AGA-3S Floating 35 lb·in (4 N·m) 60 Seconds at 60 Hz M3 Screw Terminals
M9104-IGA-2S Floating or On/Off 35 lb·in (4 N·m) 60 Seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable
with 19 AWG (0.75 mm
2
) conductors and 1/4 in. (6 mm)
ferrule ends
M9104-IGA-3S Floating or On/Off 35 lb·in (4 N·m) 60 Seconds at 60 Hz M3 Screw Terminals
M9104-GGA-2S Proportional 35 lb·in (4 N·m) 60 Seconds at 60 Hz 48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable
with 19 AWG (0.75 mm
2
) conductors and 1/4 in. (6 mm)
ferrule ends
M9104-GGA-3S Proportional 35 lb·in (4 N·m) 60 Seconds at 60 Hz M3 Screw Terminals
Code Number Description
DMPR-KC003
1
1. Furnished with the damper and may be ordered separately.
7 in. (178 mm) Blade Pin Extension without Bracket for Johnson Controls Direct-Mount Damper Applications.
DMPR-KC010 Adjustable Blade Position Indicator Switch Kit with total switching load limited to 2,000 VA for the following applications:
Pilot Duty: AC 24 V, 50 VA; AC 125/250/277 V, 125 VA
Motor Load: AC 12/250/277 V, 1/3 hp
Resistive Load: AC 125 V, 11 A; AC 250 V, 8 A; AC 277 V, 7 A (all maximum values)
DMPR-KC011 Hex Head Blade Pin Extension without Bracket
DMPR-KC012 Hex Head Blade Pin Extension without Bracket
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators
M9104-100 Connector for 3/8 in. (10 mm) Flexible Metal Conduit (10 per package)