Submittal Sheet

M9108 Series Proportional Electric Non-spring Return Actuators Submittal Bulletin 3
Ordering Information
Table 1: Actuator Models and Accessories
Product Code
Number
Description
M9108-GGA-2
70 lb∙in (8 N∙m) electric non-spring return actuator for proportional control with 0 to 10 VDC feedback
M9108-GGC-2
70 lb∙in (8 N∙m) electric non-spring return actuator for proportional control with two SPDT 24 VAC auxiliary
switches and 0 to 10 VDC feedback
M9108-HGA-2
70 lb∙in (8 N∙m) electric non-spring return actuator for proportional control with 0 to 10 VDC feedback and
adjustable zero and span
M9108-HGC-2
70 lb∙in (8 N∙m) electric non-spring return actuator for proportional control with two SPDT 24 VAC auxiliary
switches, 0 to 10 VDC feedback, and adjustable zero and span
DMPR-KR003*
Sleeve Pin Kit for Johnson Controls round dampers with a 5/16 in. (8 mm) diameter shaft
DMPR-KC003*
Blade Pin Extension without Bracket for Johnson Controls D-1300 direct-mount applications
DMPR-KC254
Inside Frame Mounting Kit for Johnson Controls dampers that require the actuator within the airstream
M9000-103
14 VA Transformer, 120/24 VAC, 60 Hz, Class 2
M9000-104
14 VA Transformer, 230/24 VAC, 60 Hz, Class 2
M9000-150
Damper Mount Linkage Kit for remote inside duct mounting an M9108 actuator to a three-blade or larger
damper (not intended for a Johnson Controls damper)
M9000-151
Base Mount Linkage Kit for remote inside duct mounting
M9000-153
Crank Arm Kit for remote mounting
M9000-154
1 in. Jackshaft Coupler Kit for mounting on a 1 in. diameter damper shaft
M9000-155
Manual Handle for positioning a damper or valve when power is removed from an M9108 actuator
M9000-160
Replacement anti-rotation bracket for M9108 actuators
M9000-200
Commissioning Tool provides a control signal to drive on/off, floating, proportional, or resistive actuators
M9000-300
Weather Shield Enclosure protects M9108 actuators in outdoor damper applications
* Furnished with the damper and may be ordered separately.