Brochure

ManualsBrandsJohnson Controls ManualsDampersM9208 24V On/Off Spring Return Actuator (70 lb-in)

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.

www.johnsoncontrols.com

1 of 6

M9208-GGx-x, M9208-AGx-x, M9208-Bxx-3

M9208-xxx-x Series Electric Spring Return Actuators

Description

The M9208-xxx-x Series Electric Spring

Return Actuators provide control of dampers

in Heating, Ventilating, and Air Conditioning

(HVAC) systems. All actuators in this series

provide 70 lb·in (8 N·m) rated torque.

A mechanical spring return system provides

rated torque with and without power applied to

the actuator. The series includes the following

control options:

• On/Off, 24 V, 120 VAC, 230 VAC power

• On/Off and Floating Point, 24 V power

• Proportional, 24 V power, for 0(2) to

10 VDC or 0(4) to 20 mA Control Signal

These actuators are configured for direct

mounting and do not require a damper

linkage. Actuators can be mounted directly to

a damper shaft from 5/16 to 5/8 in.

(8 to 16 mm) diameter with a universal clamp.

For shafts up to 3/4 in. (19 mm) diameter use

the accessory Large Shaft Coupler Kit

M9208-600. An accessory crankarm and

remote mounting kit are available for

applications where the actuator cannot be

direct-coupled to the damper shaft. Optional

line voltage auxiliary switches indicate an

end-stop position or perform switching

functions within the selected rotation range.

M9208-xxx-x Series Electric Spring

Return Actuator

Code No. LIT-1900562

Issued February 1, 2013

Refer to the M9208-xxx-x Series Electric

Spring Return Actuators Product Bulletin

(LIT-12011480) for important product

application information.

Features

• 70 lb·in. (8 N·m) rated torque

• direct-coupled design

• reversible mounting

• electronic stall detection

• double-insulated construction

• microprocessor-controlled

brushless DC motor

(-AGx and -GGx types)

• external mode selection switch

(-AGx and -GGx types)

• locking manual override with auto release

and crank storage

• override control (proportional model only)

• integral cables with colored and numbered

conductors

• integral connectors for 3/8 in. (10 mm)

Flexible Metal Conduit (FMC)

• optional integrated auxiliary switches

• UL, CE, and C-Tick compliance

• manufactured under International

Standards Organization (ISO) 9001 quality

control standards

• 5-year warranty

Accessories and Replacement Parts (Order Separately)

Code Number Description

DMPR-KC003

1. Furnished with the damper and may be ordered separately.

7 in. (178 mm) Blade Pin Extension (without bracket) for Johnson Controls Direct-Mount Damper Applications (quantity 1)

M9000-200 Commissioning Tool that provides a control signal to drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators (quantity 1)

M9000-321 Weathershield Kit for Damper Application of M9203 and M9208 Series Electric Spring Return Actuators (quantity 1)

M9000-400 Jackshaft Linkage Kit. Open-ended design enables clamping onto a jackshaft without requiring access to the ends of the jackshaft.

(quantity 1)

M9000-560 Ball Valve Linkage Kit for applying M9203 and M9208 Series Electric Spring Return Actuators to VG1000 Series Valves (quantity 1)

M9000-604 Replacement Anti-Rotation Bracket Kit for M9208, M9210, and M9220 Series Electric Spring Return Actuators (quantity 1)

M9000-606 Position Indicator for Damper Applications of M9203 and M9208 Series Actuators (quantity 5)

M9200-100 Threaded Conduit Adapter, 1/2 NPSM, for M9210(20) and M(VA)9208 Series Actuators (quantity 5)

M9208-100 Remote Mounting Kit, including Mounting Bracket, M9208-150 Crankarm, Ball Joint, and mounting fasteners (quantity 1)

M9208-150 Crankarm Adapter Kit (quantity 1)

M9208-600 Large Shaft Coupler Kit (with Locking Clip) for Mounting M9208 Series Electric Spring Return Actuators on dampers with

round shafts from 1/2 to 3/4 in. (12 to 19 mm) or square shafts from 3/8 to 9/16 in. (10 to 14 mm) (quantity 1)

M9208-601 Replacement Standard Coupler Kit (with Locking Clip) for mounting M9208 Series Electric Spring Return Actuators on dampers with round

shafts from 5/16 to 5/8 in. (8 to 16 mm) or square shafts from 1/4 to 1/2 in. (6 to 12 mm) (quantity 1)

M9208-602 Replacement Locking Clips for M9208 Series Electric Spring Return Actuators (quantity 5)

M9208-603 Adjustable Stop Kit for M9208 Series Electric Spring Return Actuators (quantity 1)

M9208-604 Replacement Manual Override Cranks for M9208 Series Electric Spring Return Actuators

with long crank radius: 2.83 in. (72 mm) (quantity 5)

M9208-605 Replacement Manual Override Cranks for M9208 Series Electric Spring Return Actuators

with short crank radius: 1.83 in. (46.5 mm) (quantity 5)

Repair Information

If the M9208-xxx-x Series Electric Spring

Return Actuator fails to operate within its

specifications, replace the unit. For a

replacement M9208-xxx-x actuator, contact the

nearest Johnson Controls® representative.

Summary of content (6 pages)

PAGE 1
Code No. LIT-1900562 Issued February 1, 2013 M9208-GGx-x, M9208-AGx-x, M9208-Bxx-3 M9208-xxx-x Series Electric Spring Return Actuators Description The M9208-xxx-x Series Electric Spring Return Actuators provide control of dampers in Heating, Ventilating, and Air Conditioning (HVAC) systems. All actuators in this series provide 70 lb·in (8 N·m) rated torque. A mechanical spring return system provides rated torque with and without power applied to the actuator.
PAGE 2
M9208-xxx-x Series Electric Spring Return Actuators (Continued) Selection Chart - x x M9208-AGA-3 150 17 to 251 x 8 7.9 (5.5) - x x M9208-AGC-3 150 17 to 251 x 8 7.9 (5.5) - x x M9208-BGA-3 55 to 71 13 to 262 x 7 6.1 (1.2) - x M9208-BGC-3 55 to 71 13 to 262 x 7 6.1 (1.2) - x M9208-BAA-3 55 to 71 13 to 262 x - - .05 (.03) x M9208-BAC-3 55 to 71 13 to 262 x - - .05 (.03) x M9208-BDA-3 55 to 71 13 to 262 x - - .04 (.
PAGE 3
M9208-xxx-x Series Electric Spring Return Actuators (Continued) Technical Specifications M9208-GGx-x Series Proportional Electric Spring Return Actuator (Part 1 of 2) Power Requirements -GGx Models AC 24 V (AC 19.2 V to 28.8 V) at 50/60 Hz: Class 2 (North America) or Safety Extra-Low Voltage (SELV) (Europe), 7.9 VA Running, 5.5 VA Holding Position DC 24 V (DC 21.6 V to 28.8 V): Class 2 (North America) or SELV (Europe), 3.5 W Running, 1.
PAGE 4
M9208-xxx-x Series Electric Spring Return Actuators (Continued) M9208-GGx-x Series Proportional Electric Spring Return Actuator (Part 2 of 2) Compliance United States UL Listed, CCN XAPX, File E27734; to UL 60730-1A: 2003-08, Ed. 3.1, Automatic Electrical Controls for Household and Similar Use; and UL 60730-2-14: 2002-02, Ed. 1, Part 2, Particular Requirements for Electric Actuators. (Models: All) Canada UL Listed, CCN XAPX7, File E27734; to UL 60730-1:02-CAN/CSA: July 2002, 3rd Ed.
PAGE 5
M9208-xxx-x Series Electric Spring Return Actuators (Continued) M9208-AGx-x Series On/Off and Floating Point Control Electric Spring Return Actuator (Part 2 of 2) Ambient Conditions Standard Operating -40 to 140°F (-40 to 60°C); 90% RH Maximum, Noncondensing Storage -40 to 185ºF (-40 to 85ºC); 95% RH Maximum, Noncondensing Dimensions Compliance 6.33 x 3.90 x 2.26 in. (160.7 x 99 x 57.5 mm) United States UL Listed, CCN XAPX, File E27734; to UL 60730-1A: 2003-08, Ed. 3.
PAGE 6
M9208-xxx-x Series Electric Spring Return Actuators (Continued) M9208-Bxx-3 Series On/Off Electric Spring Return Actuators (Part 2 of 2) Mechanical Connections Ambient Conditions Round Shafts Range of Sizes: 5/16 to 5/8 in. (8 to 16 mm) Square Shafts Range of Sizes: 1/4 to 1/2 in.