Product Overview

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2013 Johnson Controls, Inc.
www.johnsoncontrols.com
5
NS Series Network Sensors (Continued)
Ambient Conditions Operating: 32 to 104°F (0 to 40°C); 10 to 90% RH, Noncondensing; 85°F (29°C) Maximum Dew Point
Storage with LCD Display: -4 to 140°F (-20 to 60°C); 5 to 95% RH, Noncondensing
Storage without LCD Display: -40 to 158°F (-40 to 70°C); 5 to 95% RH, Noncondensing
Compliance BACnet
International
BACnet Testing Laboratories™ (BTL) 135-2004 Listed BACnet Smart Sensor (B-SS)
Note: Excludes the NS-ATV700x-0 and NS-BTV700x-0 models.
United States UL Listed, File E107041, CCN PAZX, Under UL 916, Energy Management Equipment;
FCC Compliant to CFR 47, Part 15, Subpart B, Class A
Canada UL Listed, File E107041, CCN PAZX7, Under CAN/CSA C22.2 No. 205, Signal Equipment;
Industry Canada, ICES-003
Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and
other relevant provisions of the EMC Directive 2004/108/EC.
Australia and New
Zealand
C-Tick Mark, Australia/NZ Emissions Compliant
Accessory (Order Separately) NS-WALLPLATE-0: Adapts an 80 x 80 mm NS Series Network Zone Sensor to a Standard 80 x 120 mm Wallbox
Shipping Weight NS-Axx7xxx-0 Models: 0.20 lb (0.09 kg)
NS-Bxx7xxx-0 and NS-Mxx700x-0 Models: 0.25 lb (0.11 kg)
NS Series Network Zone Sensors — Motion Detection Only Models (No Temperature or Humidity Sensing)
Supply Voltage 9.8 to 16.5 VDC; 15 VDC Nominal (From SA Bus)
Current Consumption 13 mA Maximum (Non-transmitting)
Terminations Modular Jack or Screw Terminal Block
Sensor Addressing
(NS-MNN7003-0 Model)
DIP Switch Set from 200 to 203; Factory Set at 203
Wire Size Modular Jack Model: 24 AWG or 26 AWG (0.5 or 0.4 mm Diameter) Recommended;
Three Twisted Pair (Six Conductors)
Screw Terminal Block Model: 18 to 22 AWG (1.0 to 0.6 mm Diameter);
22 AWG (0.6 mm Diameter) Recommended
Communication Rate Auto-Detect: 9.6k, 19.2k, 38.4k, or 76.8k bps
Mounting Surface-Mounted or Vertical Wallbox-Mounted: 120 x 80 mm
PIR Occupancy Sensor
Motion Detection
Minimum 94 Angular Degrees up to a Distance of 15 ft (4.6 m);
Based on a Clear Line of Sight
Ambient Conditions Operating: 32 to 104°F (0 to 40°C); 10 to 90% RH, Noncondensing; 85°F (29°C) Maximum Dew Point
Storage: -40 to 158°F (-40 to 70°C); 5 to 95% RH, Noncondensing
Compliance BACnet
International
BACnet Testing Laboratories™ (BTL) 135-2004 Listed BACnet Smart Sensor (B-SS)
United States UL Listed, File E107041, CCN PAZX, Under UL 916, Energy Management Equipment;
FCC Compliant to CFR 47, Part 15, Subpart B, Class A
Canada UL Listed, File E107041, CCN PAZX7, Under CAN/CSA C22.2 No. 205, Signal Equipment;
Industry Canada, ICES-003
Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and
other relevant provisions of the EMC Directive 2004/108/EC.
Australia and
New Zealand
C-Tick Mark, Australia/NZ Emissions Compliant
Shipping Weight 0.25 lb (0.11 kg)
NS Series Network Zone Sensor — CO
2
Models (Part 1 of 2)
Supply Voltage Non-isolated: 20 to 30 VAC (18 to 30 VDC), Class 2 or Safety Extra-Low Voltage (SELV)
Isolated: 9.8 to 16.5 VDC; 15 VDC Nominal (From SA Bus)
Current Consumption Non-isolated: 22 mA Average at 24 VAC; 28 mA Average at 24 VDC
Isolated: 5 mA Maximum, Non-transmitting (From SA Bus)
Power Consumption Non-isolated: Less Than 0.7 W Average
Terminations Non-isolated Supply: Screw Terminal Block
SA Bus: Modular Jack or Screw Terminal Block
Sensor Addressing DIP Switch Set from 212 to 219; Factory Set at 212
Wire Size Modular Jack: 24 or 26 AWG (0.5 or 0.4 mm Diameter) Recommended; Three Twisted Pair (Six Conductors)
Screw Terminal Block: 18 to 22 AWG (1.0 to 0.6 mm Diameter); 22 AWG (0.6 mm Diameter) Recommended
Communication Rate Auto-Detect: 9.6k, 19.2k, 38.4k, or 76.8k bps
CO
2
Measurement Range 0 to 2,000 ppm
NS Series Network Zone Sensors — Temperature Only Models and Temperature and Humidity Models (Part 2 of 2)