Brochure
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
T-4000 Series
Test Equipment and Repair Parts
Description
The multi-part selection chart below lists the available repair parts and
test equipment to maintain all T-4000 Series Pneumatic Thermostats.
Refer to T-4000-619 Repair Parts Manual for H-4000, H-5000, T-4000
and T-5000 Series Instruments Installation Data (LIT-7171088X) for
important additional product information.
0
20
40
60
80
100
120
140
160
180
200
B
C
A
H
I
Selection Chart
T-4000 Test Equipment (Part 1 of 4)
Code Number Callout Description Where Used
T-4000-615 A Test Port Fitting, Plug-In
(Order in Multiples of Ten)
All Instruments
JC 5310 B Test Gages 0 to 30 psig (0 to 210 kPa) All Controllers
JC 5386 50 to 100°F, 40 to 240°F,
40 to 65°F, 60 to 85°F
All Transmitters
JC 5361 C Hypodermic Test Probe with Two Needles All Instruments Using the T-4000-615 Test Port Fitting
JC 5384 Replacement Needles (Order in Multiples of 12) All Instruments
T-4002-617 H Screws for Cover and
Bracket
#4-40 x 1/4 in. Hex Screws
(Order in Multiples of 100)
All Instruments and Aspirator Wallbox Covers
T-4000-627 #4-40 x 1/4 in. Torx Tamper Proof Screws with
Driver
(Order in Multiples of 50)
T-4000-628 #4-40 x 1/4 in. Torx Tamper Proof Screws (Order
in Multiples of 100)
JC 5309 I Cover and Bracket
Screwdrivers
Allen Head Flex Driver
(Order in Multiples of One)
All Instruments Except Those Using Tamper Proof
Screws
T-4000-629 Torx Tamper Proof Driver
(Order in Multiples of Five)
All Instruments Using Tamper Proof Screws
Code No. LIT-1921725
Issued July 19, 2011