Product Overview

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2013 Johnson Controls, Inc.
www.johnsoncontrols.com
1
T-5210
Pneumatic Temperature Transmitter
Description
The T-5210 Pneumatic Temperature
Transmitter measures temperature and
converts this measurement to an air pressure
signal that is transmitted to a pneumatic
receiver, controller, or receiver-indicator.
When used with a Dewcel
®
(purchased
locally), the T-5210 operates as a dew point
transmitter.
Refer to T-5210 Pneumatic Temperature
Transmitter Product Bulletin (LIT-7171170) for
important product information.
Selection Charts
T-5210 Pneumatic Temperature Transmitter
Code Number Element Style Operating Range
T-5210-1001 Copper Bulb with 5-1/2 in.
(140 mm) Copper Capillary
50 to 100°F
T-5210-2002 0 to 100°C
T-5210-2003 -15 to 35°C
T-5210-1002 0 to 100°F
T-5210-1004 40 to 240°F
T-5210-1008 50 to 150°F
T-5210-1123 60 to 85°F
T-5210-2001 10 to 35°C
T-5210-1125 40 to 65°C
T-5210-1113 Copper Bulb with 4 ft (1.2 m)
Copper Capillary
-40 to 160°F
T-5210-2004 -40 to 60°C
T-5210-1144 -20 to 80°F
T-5210-1114 0 to 100°F
T-5210-2005 -15 to 35°C
T-5210-1151 20 to 120°F
T-5210-1135 200 to 400°F
T-5210-1007 8 ft (2.4 m) Copper Averaging
Element with 1 ft (305 mm)
Copper Capillary
50 to 150°F
T-5210-1006 40 to 240°F
T-5210-1009 0 to 100°F
T-5210-1124 40 to 65°F
T-5210-2006 0 to 50°C
T-5210-2007 -15 to 35°C
T-5210-1150 20 to 120°F
T-5210-1005 50 to 100°
F
T-5210-1116 17 ft (5.2 m) Copper Averaging
Element with 1 ft (305 mm)
Copper Capillary
50 to 150°F
T-5210-1118 0 to 100°F
T-5210-2008 -15 to 35°C
Accessories for T-5210 Pneumatic Temperature Transmitter
Code Number Description
T-275-100 “B” Bulb Element Holder
T-275-101 Averaging Element Holder
T-800-1603 Single-Hub Duct Flange
T-800-1604 Double-Hub Duct Flange
T-800-1605 Brass Well, 6-1/2 in.
T-800-1606 Stainless Steel Well, 5-1/4 in.
TE-6001-8 Temperature Element Holder
T-800-1610 Bulb Element Adapter Nut, 1/2 in. NPT
T-800-1618 Brass Well, 9-1/2 in.
T-800-1620 Stainless Steel Well, 9-1/2 in.
T-5210-129 Sheet Metal Bracket
T-5210-138 Dewcel
®
Adapter Kit
T-5210-602 Pneumatic Transmitter Cover Kit, includes one Blank
Cover and two Pan-Head Mounting Screws
SHL10A-603R Bulb Weather Shield
R-3710 Series 0.007 in. Aqua-colored Restrictor
Code No. LIT-1921595
Issued February 19, 2013
T-5210
Pneumatic Temperature Transmitter
Features
• provides an exact proportional relationship
between the measured temperature and
the transmitted signal
• includes appropriate brackets for mounting
to ductwork, walls, or directly to the hub of
a duct flange, or separable well
• operates in any position from a rigid, flat,
mounting surface
• requires a 0.007 in. restricted supply
Repair Information
If the T-5210 Pneumatic Temperature
Transmitter fails to operate within its
specifications, replace the unit. For a
replacement temperature transmitter, contact
the nearest Johnson Controls®
representative.