Overview of Primary Product
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2006 Johnson Controls, Inc.
www.johnsoncontrols.com
1 of 4
TE-6300 Series Temperature Sensors
Code No. LIT-1900217
Issued November 13, 2006
TE-63xxM Models
The TE-63xxM (metal enclosure) models:
• come with a corrosion-protected steel
enclosure with a 0.88 in. (22 mm) hole for a
1/2 in. conduit fitting
• include two hex-head self-drilling screws
for mounting the duct and duct averaging
models
• offer (well models only) either a brass
threadless or 1/2-14 NPT threaded well
sensor holder for mounting in WZ-1000
Series thermal wells (Order the thermal
well separately.)
• provide optional well sensor holders (order
separately) to mount duct models in
thermal wells.
• meet UL 1995 plenum use requirements
• offer optional accessory kit (order
separately) to replace plastic hole plug and
wiring bushing in order to meet
International Mechanical Code (IMC)
requirements
TE-63xxP Models
The TE-63xxP (plastic enclosure) models:
• provide a thermoplastic conduit box with
1/2-14 NPT female thread for connecting to
conduit
• provide aluminum mounting plate and
1/2-14 NPT threaded hub mounting options
for the duct and duct averaging models
• use the 1/2-14 NPT female thread to mount
the Outdoor Air models directly to ridged
conduit
• offer (for well models only) either a
thermoplastic threadless or 1/2-14 NPT
threaded well sensor holder for mounting in
WZ-1000 Series thermal wells. (Order the
thermal well separately.)
• provide optional well sensor holders (order
separately) to mount duct models in
thermal wells
• offer an optional accessory metal cover kit
(order separately) to replace the plastic
cover to meet UL 1995 plenum use
requirements
• include a replaceable sensing probe on
duct probe, outdoor air, and well insertion
models
Description
The TE-6300 Temperature Sensor line
provides economical solutions for a wide
variety of temperature sensing needs,
including wall mount, outdoor air, duct,
strap-mount, well, duct averaging, and
Variable Air Volume (VAV) flange mount duct
probe applications. The TE-6300 line offers
both a metal and a plastic enclosure for the
most popular models.
Sensors are available in the following types:
• 1k ohm thin-film nickel
• 1k ohm nickel averaging
• 1k ohm thin-film platinum
• 100 ohm platinum equivalent averaging
• 1k ohm platinum equivalent averaging
• 2.2k (2,252) ohm thermistor
• 10k ohm thermistor, Johnson Controls®
Type II
Each sensor is packaged with the necessary
mounting accessories to maximize ordering
and installation ease and reduce both
commissioning time and cost.
Refer to the TE-6300 Temperature Sensors
Product Bulletin (LIT-216320) for important
product application information.
Features
• full line of versatile sensors — supports all
your temperature sensing needs from a
single supplier: wall mount, outdoor air,
duct probe, duct averaging, strap-mount,
well insertion, and flange mount duct
probe.
• single assembly ordering — simplifies
ordering; provides a complete assembly in
one box.
• models featuring an integral NPT Adaptor
— increase sensor connection strength,
eliminates the need for a special adaptor.
• models with a stainless steel sensor probe
— protect the sensor while increasing
corrosion resistance.
• metal enclosure (TE-63xxM Models only)
— meets plenum requirements.
• models featuring a retainer for the sensor
holder — lock the sensor holder into the
conduit box.
All TE-6300 series sensors are two-wire,
passive, resistance output devices.
TE-63x4P Wall Mount Models
The TE-63x4P (plastic enclosure) models:
• come with a white thermoplastic ventilated
cover with a brushed aluminum face plate
and a steel mounting plate for surface
mounting
• include faceplates for both horizontal and
vertical mounting
• offer an accessory mounting kit for
mounting to a standard electrical box
• offer optional covers
TE-63xS Models
The TE-63xS (Strap-Mount) models:
• provide a 1/4 in. (6.35 mm) diameter
stainless steel probe without an enclosure
• include three cable ties for mounting to
pipe up to 2-5/8 in. (67 mm) diameter
• come equipped with a 10 ft (3 m) plenum
rated cable
• meet UL 1995 plenum use requirements
• offer an accessory mounting kit for
mounting to a pipe up to 11 in. (280 mm)
diameter
TE-63xxV Models
The TE-63xxV (VAV flange mount) models:
• provide a stainless steel mounting flange
with two hex-head self-drilling mounting
screws
• come equipped with a 10 ft (3 m) plenum
rated cable with 1/4 in. (6.35 mm) female
insulated quick-connect terminations on
leads
• meet UL 1995 plenum use requirements
Repair Information
If the TE-6300 Series Temperature Sensor
fails to operate within its specifications, refer
to the TE-6300 Series Temperature Sensors
Product Bulletin (LIT-216320) for a list of
repair parts available.
TE-6300 Series Temperature Sensors