Product Overview

TE-6800 Series Temperature Sensors Product Bulletin2
Product Overview
A manual override PB allows the occupant to control
the space temperature. This feature allows the end
user to signal the controller that the space is occupied
after hours or on weekends.
An LED is standard for all models. When used with a
VMA1200 or VMA1400 Series controller, the green
LED can display the current operating mode of that
controller: On = Occupied, Off = Unoccupied, and
Flashing = Standby.
The controller compatibility DIP switch programs the
TE-6800 to:
• disable the PB and LED indicator
• enable PB with LED indicator
• enable PB without LED indicator
The DIP switch matches the PB and LED indication
with features recognized by more recent
Johnson Controls® controllers. Specifically, the DIP
switch allows for matching controller features to disable
the occupancy LED and/or PB.
The TE-6800 is available with a modular jack or
terminal block wiring connections, and either a
1000-ohm nickel or platinum temperature sensing
element. The unit can be used with Application Specific
Controllers (ASCs) or for universal applications.
The TE-6800 Temperature Sensor uses a warmer/
cooler single setpoint adjustment dial. The setpoint dial
is adjusted clockwise to heat and counterclockwise to
cool.
Ordering Information
To order a TE-6800 Series Temperature Sensor,
contact the nearest Johnson Controls representative.
Specify the desired sensor product code number from
Table 2 and accessories from Table 3, depending on
the model.
IMPORTANT: The TE-6800 Series Temperature
Sensors are intended to provide an input to
equipment under normal operating conditions.
Where failure or malfunction of the TE-6800 sensor
could lead to personal injury or property damage to
the controlled equipment or other property,
additional precautions must be designed into the
control system. Incorporate and maintain other
devices, such as supervisory or alarm systems or
safety or limit controls, intended to warn of or protect
against failure or malfunction of the TE-6800 sensor.
Table 2: TE-6800 Series Temperature Sensor Product Code Numbers
Product Code
Number
Temperature
Sensing
Element
Warmer/Cooler
Temperature
Setpoint
Adjustment
Override
Temperature
Display
Connection Enclosure
Dimension,
mm
TE-68NT-0N00S Ni1000 No No Terminal Block 80 x 80
TE-68NT-1N00S Ni1000 Yes No Terminal Block 80 x 80
TE-68NP-0N00S Ni1000 No No Modular Jack 80 x 80
TE-68NP-1N00S Ni1000 Yes No Modular Jack 80 x 80
TE-68PP-0N00S Pt1000 No No Modular Jack 80 x 80
TE-68PP-1N00S Pt1000 Yes No Modular Jack 80 x 80
TE-68PT-0N00S Pt1000 No No Terminal Block 80 x 80
TE-68PT-1N00S Pt1000 Yes No Terminal Block 80 x 80