Product Overview
Table Of Contents
- Product Overview
- Ordering Information
- To order a TE-6800 Series Temperature Sensor, contact the nearest Johnson Controls representative. Specify the desired sensor product code number from Table 2 and accessories from Table 3, depending on the model.
- Repair Information
- Technical Specifications
- TE-6800 Series Temperature Sensors (Part 1 of 2)
Published in U.S.A. www.johnsoncontrols.com
TE-6800 Series Temperature Sensors Product Bulletin4
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2010 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Ambient
Storage
Conditions
-40 to 140°F (-40 to 60°C)
5 to 95% RH, noncondensing; 86°F (30°C) maximum dew point
Materials White thermoplastic
Accessory NS-WALLPLATE-0 Adapts a TE-6800 Sensor (80 x 80 mm) to a standard 80 x 120 mm wallbox
Dimensions
(H x W x D)
3-1/4 x 3-1/4 x 1-7/16 in. (80 x 80 x 36 mm)
Shipping Weight 1 lb (0.5 kg)
Compliance United States UL Listed, File E107041,
CCN PAZX, Under UL 916, Energy Management Equipment
Canada UL Listed, File E107041,
CCN PAZX7, Under CAN/CSA C22.2 No. 205, Signal Equipment
Europe CE Mark – Johnson Controls, Inc. declares that the TE-6800 Series
Temperature Sensors are in compliance with the essential requirements and
other relevant provisions of the EMC Directive 2004/108/EC
Australia and New
Zealand
C-Tick Mark, Australia/NZ Emissions Compliant
United States Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his/her own expense.
Canadian Emissions Compliance
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
TE-6800 Series Temperature Sensors (Part 2 of 2)