Product Overview

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
1 of 1
6.06 in.
(154.0 mm)
3.84 in. dia.
(98.0 mm)
0.25 in. dia.
(6.4 mm)
(Max. Cable)
2.5 in.
(63.5 mm)
Cover Removal
Dimensions in. (mm)
catdim11.eps
VA-715x Series
Electric Valve Actuator
Code No. LIT-1924175
Issued August 4, 2011
Description
The VA-715x Series synchronous,
motor-driven actuator provides incremental
(Three-Wire), incremental with feedback, or
proportional control of valves with up to
3/4 in. stroke in heating, ventilating, and air
conditioning (HVAC) applications.
This compact, non-spring return actuator has
a 90 lb (400 N) force minimum, and responds
to a variety of input signals.
The VA-715x Series can be easily field
mounted or ordered factory-coupled to
VG7000 Series Bronze Control Valves.
Selection Charts
VA-715x Series Actuators
Code Number Description
VA-7150-1001 Three-Wire Incremental
VA-7153-1001 Three-Wire Incremental with
Position Feedback
VA-7152-1001 Proportional, 0 to 10 VDC
Accessories for VA-715x Series
Code
Number
Description
V-9999-670 Bonnet Adaptor (Used for Field
Mounting to VT Series Valve Body
with Threaded Stem)
Y20EBE-2 Adaptor Kit (Used for Field
Mounting to VT Series Valve Body
with Slotted Stem)
VA-7150-1900 Conduit Adaptor Kit
V-9999-HW1 Mounting Kit to Mount VA-715x or
VA-720x Series Electric Actuators
to Honeywell
® V75011A, F, G, 1/2
Through 3 in. Single-Seated and
V5013F Three-Way Valves
V-9999-BC1 Mounting Kit to Mount VA-715x or
VA-720x Series Electric Actuators
to Barber-Colman
® 1/2 Through
1-1/4 in. VB-9xxx Valve Bodies
Repair Information
If the VA-715x Series Actuator fails to operate
within its specifications, replace the unit. For a
replacement actuator, contact the nearest
Johnson Controls® representative.
Technical Specifications
VA-715x Series Electric Valve Actuator
Power Requirements 24 VAC (20 to 30 VAC), 50/60 Hz
Input Signal Incremental: 24 VAC, 50/60 Hz
Incremental with Position Feedback: 24 VAC, 50/60 Hz
Proportional: 0 to 10 VDC
Input Signal
Adjustments
(Proportional)
Input Signal: 0 to 5, 5 to 10, 0 to 10 VDC (Jumper Selectable)
Action: Drive Up (RA) or Drive Down (DA) on Signal Increase (Jumper
Selectable)
Factory Setting: 0 to 10 VDC Over 3/4 in. (19 mm) Stroke, DA
Input Impedance
(Proportional)
100,000 Ohms
Feedback Signal Proportional: 0 to 2000 Ohm ±25%, 1/4 Watt, Over 25/32 in. (20 mm) Stroke
Mechanical Output 90 lb Force (400 N) Minimum
Stroke Range 5/16 to 25/32 in. (8 to 20 mm)
Nominal Stroke Timing 50 Hz: 85 Seconds 5/16 in. (8 mm) Stroke
135 Seconds 1/2 in. (13 mm) Stroke
200 Seconds 3/4 in. (19 mm) Stroke
60 Hz: 70 Seconds 5/16 in. (8 mm) Stroke
110 Seconds 1/2 in. (13 mm) Stroke
165 Seconds 3/4 in. (19 mm) Stroke
Media Temperature 280°F (138°C) Maximum
Electrical Connection Screw Terminals for 16 AWG Maximum
Mechanical Connection For 1/4 - 28 UNF Valve Stem
Enclosure NEMA 2, IP42
Ambient Conditions Operating: 0 to 140°F (-18 to 60°C); 10 to 90% RH Non-Condensing
86°F (30°C) Maximum Dew Point
Storage: -4 to 150°F (-20 to 65°C); 5 to 90% RH,
86°F (30°C) Maximum Dew Point
Agency Listings UL 873 Listed, File E27734 CSA C22.2 No. 139 Certified, File LR85083
Features
• magnetic clutch provides constant output
force for positive closeoff of valves, and
protects the motor in stall conditions
• selectable direct and reverse action
simplifies setup and installation
• durable construction provides a longer
cycle life
• compact unit provides 90 lb force output,
covering a wide range of applications with
just one actuator
• unique yoke design enables easy field
mounting to valves, reducing installation
and stroke adjustment time
Applications
The VA-715x Series Actuator is used in
conjunction with VG7000 Series Valves for hot
water and chilled water systems. For VG7000
Series Valve options, refer to VG7000 Series
Brass Trim Globe Valves with VA-715x Series
Electric Actuators Catalog Page
(LIT-1900084) and VG7000 Series Stainless
Steel Trim Globe Valves with
VA-715x Series Electric Actuators Catalog
Page (LIT-1900090). For field mounting
options, refer to VG7000 Series Bronze Globe
Valves for Assembly in the Field Catalog Page
(LIT-1924005).
VA-715x Electric Valve Actuator