Brochure

VG1000 Series Forged Brass Ball Valves Product Bulletin 3
Ordering Information
Table 2: Ordering Data
1
V G Valve Global
1 2 1 Product 1 = Forged Brass Ball Valve
3Family
2 Body Type
and Flow
Characteristic
2 = Two-Way, with Equal Percentage Flow Characteristics
4 8 = Three-Way Mixing, with Equal Percentage Flow Characteristics of In-line
Port and Linear Flow Characteristics of Angle-Port
4 End Connection 4 = Threaded - NPT Taper
5 7 = Sweat (1/2 to 1 in. Sizes)
9 = Press (ProPress® Fitting Compatible, 1/2 to 1 in. Sizes)
Press End Connections are designed to work with RIDGID® Pressing Tools.
1 Trim 1 = Chrome-Plated Brass Ball and Nickel-Plated Brass Stem
6
5 = Stainless Steel Ball and Stem, 300 Series
A E Size and
Maximum Cv
Size Control
Disk
Control Port
Cv (kv)
Bypass Port Cv (kv)
(Three-Way Only)
7 8 (kv = Cv x 0.857) AD = 1/2 in. (DN15) Yes 1.2 (1.0) 0.7 (0.6)
AE = 1/2 in. (DN15) Yes 1.9 (1.6) 1.2 (1.0)
AF = 1/2 in. (DN15) Yes 2.9 (2.5) 1.9 (1.6)
AG = 1/2 in. (DN15) Yes 4.7 (4.0) 2.9 (2.5)
AL = 1/2 in. (DN15) Yes 7.4 (6.3) 4.7 (4.0)
AN = 1/2 in. (DN15)
2
No 11.7 (10.0) 5.8 (5.0)
BG = 3/4 in. (DN20) Yes 4.7 (4.0) 2.9 (2.5)
BL = 3/4 in. (DN20) Yes 7.4 (6.3) 4.7 (4.0)
BN = 3/4 in. (DN20)
2
No 11.7 (10.0) 5.8 (5.0)
CL = 1 in. (DN25) Yes 7.4 (6.3) 4.7 (4.0)
CN = 1 in. (DN25) Yes 11.7 (10.0) 7.4 (6.3)
CP = 1 in. (DN25)
2
No 18.7 (16.0) 9.4 (8.0)
DN = 1-1/4 in. (DN32) Yes 11.7 (10.0) 7.4 (6.3)
DP = 1-1/4 in. (DN32) Yes 18.7 (16.0) 11.7 (10.0)
DR = 1-1/4 in. (DN32)
2
No 29.2 (25.0) 14.6 (12.5)
EP = 1-1/2 in. (DN40) Yes 18.7 (16.0) 11.7 (10.0)
ER = 1-1/2 in. (DN40) Yes 29.2 (25.0) 18.7 (16.0)
ES = 1-1/2 in. (DN40)
2
No 46.8 (40.0) 23.4 (20.0)
FR = 2 in. (DN50) Yes 29.2 (25.0) 18.7 (16.0)
FS = 2 in. (DN50) Yes 46.8 (40.0) 29.2 (25.0)
FT = 2 in. (DN50)
2
No 73.7 (63.0) 36.8 (31.5)
+ Actuator + = Factory-Mounted Actuator
9 Mounting (Leave Fields 9 through 15 blank for valve without factory-mounted actuator.)
H = High Temperature Linkage (VA9104, VA9203, and VA9208 actuators)
1 234567891011 12 13 14 15 = Field
V G1 241AE+ Example: Forged brass ball valve, two-way, threaded (NPT), brass trim, equal %,
1/2 in. (DN15) 1.9 Cv.
Valve + Actuator
1. Before retrofitting older valves with VA9104, M9104, VA9203, or VA9208 actuators, be sure that the valves have a tapped
hole in the center of the valve stem and no threads in the flange holes. These direct mount actuators do not fit older valves
designed without a tapped center stem hole or with threaded flange mounting holes.
2. Indicates model without characterizing disk.