Valve Install Instructions

Published in U.S.A. www.johnsoncontrols.com
VG1000 Series Forged Brass Ball Valves Installation Instructions14
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2011 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Flow Characteristics Two-Way Equal Percentage
Three-Way Equal Percentage Flow Characteristics of In-line Port (Coil) and
Linear Flow Characteristics of Angle Port (Bypass)
Rangeability
2
Greater than 500:1
Minimum Ambient Operating
Temperature
-4°F (-20°C) VA9104 and M9104 Series Non-Spring Return Actuator
-4°F (-20°C) M9106 and M9109 Series Non-Spring Return Actuators
-22°F (-30°C) VA9203 Series Spring Return Actuators
-40°F (-40°C) VA9208 Series Spring Return Actuators
Maximum Ambient
Operating Temperature
(Limited by the Actuator)
3
Direct Mount or
with M9000-561
Thermal Barrier
140°F (60°C) VA9104 Series Non-Spring Return Actuators
M9000-551 Linkage 140°F (60°C) M9104 Series Non-Spring Return Actuators
Direct Mount or
with M9000-561
Thermal Barrier
140°F (60°C) VA9203 and VA9208 Series Non-Spring Return
Actuators
M9000-5xx Series
Linkage
125°F (52°C) M9106 Series Non-Spring Return Actuators
122°F (50°C) M9100 Series Non-Spring Return Actuators
Leakage 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
1% of Maximum Flow for Three-Way Bypass Port
End Connections National Pipe Thread (NPT): 1/2 to 2 in. (DN15 to DN50)
Sweat: 1/2 to 1 in. (DN15 to DN25)
Press (ProPress® Compatible): 1/2 to 1 in. (DN15 to DN25)
Materials Body Forged Brass
Ball VG12x1 and VG18x1 Series: Chrome Plated Brass
VG12x5 and VG18x5 Series: 300 Series Stainless Steel
Blowout-Proof
Stem
VG12x1 and VG18x1 Series: Nickel Plated Brass
VG12x5 and VG18x5 Series: 300 Series Stainless Steel
Seats Graphite-Reinforced Polytetrafluoroethylene (PTFE) with
Ethylene Propylene Diene Monomer (EPDM) O-Ring Backing
Stem Seals EPDM Double O-Rings
Characterizing Disk Amodel® AS-1145HS Polyphthalamide Resin
1. Proper water treatment is recommended; refer to the VDI 2035 Standard.
2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.
3. In steam applications, install the valve with the stem horizontal to the piping and wrap the valve and piping with insulation.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
VG1000 Series Forged Brass Ball Valves (Part 2 of 2)