Brochure

Published in U.S.A. www.johnsoncontrols.com
VG1000 Series Forged Brass Ball Valves Product Bulletin 49
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2011 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
End Connections National Pipe Thread (NPT): 1/2 to 2 in. (DN15 to DN50)
Sweat: 1/2 to 1 in. (DN15 to DN25)
Use a low melting point solder.
Press (ProPress compatible): 1/2 to 1 in. (DN15 to DN25)
(Press end connections are designed to work with RIDGID pressing
tools.)
Materials Body Forged Brass
Ball VG12x1 and VG18x1 Series: Chrome Plated Brass
VG12x5 and VG18x5 Series: 300 Series Stainless Steel
Blowout-Proof
Stem
VG12x1 and VG18x1 Series: Nickel Plated Brass
VG12x5 and VG18x5 Series: 300 Series Stainless Steel
Seats Graphite-Reinforced PTFE with Ethylene Propylene Diene Monomer
(EPDM) O-Ring Backing
Stem Seals EPDM Double O-Rings
Characterizing
Disk
Amodel AS-1145HS Polyphthalamide Resin
1. Proper water treatment is recommended; refer to the VDI 2035 Standard.
2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.
3. In steam applications, install the valve with the stem horizontal to the piping and wrap the valve and piping with insulation.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
VG1000 Series Forged Brass Ball Valves (Part 2 of 2)